Which UCS Manager Backup Type Covers Chassis, FEX, IOM and Blade Identities

350-601 By islever Editorial Last updated

Implement compute configuration management (Backup and restore)

Short answer

D Perform a system configuration backup in XML to the remote server and reapply it with the merge import method.

Question

An engineer must perform backup and restore of the Cisco UCS Manager configuration. The configuration must be stored on a remote server via XML encoding. The backup must store the configurations of the chassis, FEX, rack servers, IOMs, and blade server. Which set of actions accomplishes these goals?
  1. Perform an all configuration backup and run the system restore procedure.
  2. Perform a full state configuration backup and run the restore procedure.
  3. Perform a logical configuration backup and run the replace import method.
  4. Perform a system configuration backup and run the merge import method. Correct Answer

Key Takeaways

It tests that backup type, encoding and restore verb must all match: only system configuration preserves chassis/FEX/IOM/blade identities in XML, and XML files are imported, not restored.

This 350-601 question tests Cisco UCS Manager backup types, XML encoding and import methods. The correct choice is a system configuration backup reapplied with the merge import method (D).

Common mistake: Option B — full state is the only backup usable for true disaster recovery, but it is written as a binary .bin file, so it fails the question's explicit XML encoding requirement.

Expert Analysis

Trace the backup wizard. In Cisco UCS Manager, Admin → Backup and Restore makes three decisions in sequence: backup type, file format/encoding, and destination. Selecting a Configuration type (All, System, Logical, Specific) produces an XML file written to a remote SCP/SFTP/TFTP/HTTP server; selecting Full State produces a binary .bin snapshot. The question's explicit "XML encoding" therefore excludes Full State immediately, and an XML configuration file is never re-applied by a "restore procedure" — it is imported into a fabric interconnect.

Apply the scope filter. The required content is chassis, FEX, rack servers, IOMs and blade server. Only the system configuration backup carries that content: it "preserves identities for Chassis, FEX, Rack Servers, and user labels for Chassis, FEX, Rack Servers, IOMs and Blade Servers." A logical configuration backup holds service profiles, VLANs, VSANs, pools and policies only — no chassis, FEX, IOM or blade identities — so option C is wrong even though "replace import" sounds authoritative. Option A also fails on its second half: "system restore procedure" is the full-state recovery path, not how an XML configuration file is re-applied.

Full state is the trap. Option B is what disaster-recovery doctrine teaches: full state is the only file usable to restore a system. But it is binary, so it violates the XML requirement — a point the community flags: "It is binary, but only full state is used for restore. Other types cannot be used for restore." With XML fixed by the wording, B cannot be correct.

Merge vs replace. Merge compares the imported file with the running configuration and overwrites conflicting objects from the file; replace deletes existing configuration first. Nothing in the scenario asks for a destructive wipe, and option D is the only XML-valid choice pairing the correct scope with the correct import method, so D is the answer.

Official Reference

Exam Strategy

When a question specifies an encoding or file format, eliminate options using that format first: here XML rules out full state before you read anything else. Then match the entity list in the question to the backup type's documented scope word for word — "preserves identities for Chassis, FEX..." is a direct quote from the system configuration definition. Finally check the operation verb: configuration XML files are imported (merge or replace), while only full-state files go through the restore procedure.

Frequently Asked Questions

Why is full state backup not the answer if only it supports disaster recovery?

Full state produces a binary .bin file, while the question explicitly requires XML encoding. XML configuration backups are reapplied through the import (merge or replace) method instead of the restore procedure.

What does a UCS Manager system configuration backup actually contain?

It stores AAA-related settings and preserves identities and user labels for Chassis, FEX, Rack Servers, IOMs and Blade Servers. Logical backups exclude those physical identities.

What is the difference between merge and replace import in UCS Manager?

Merge compares the imported file with the existing configuration and overwrites conflicts from the file. Replace removes the existing configuration before importing, so it is destructive.

More 350-601 FAQ →

Community Votes

D
69%
C
23%
A
8%

69% of anonymous learners picked answer D. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 19 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 19

  1. Scheldon 👍 3 Answered C
    Only logical configuration will backup configurations Logical configuration—An XML file that includes all logical configuration settings such as service profiles, VLANs, VSANs, pools, and policies. You can use the file generated from this backup to import these configuration settings to the original fabric interconnect or to a different fabric interconnect. You cannot use this file for a system restore. If you choose system configuration it will backup user accounts, labels etc. Beside only option C have "replace" as a method which we need to use for this task.
  2. paradigm88 👍 3 Answered D
    System Configuration—The backup file preserves identities for Chassis, FEX, Rack Servers, and user labels for Chassis, FEX, Rack Servers, IOMs and Blade Servers. https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_backup_and_restore_configuration.html#task_D97990B1ED0F4BCB8469D5A671774B5D
  3. RFV147 👍 2
    I'd say B, full configuration: ''You can use the file generated from this backup to restore the system during disaster recovery. ''. Other files cannot be used for system restore. https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_backup_and_restore_configuration.html#task_D97990B1ED0F4BCB8469D5A671774B5D But the issue is that in the question it is mentioned that the XML encoding shold be used, and the full sate is binary.... Even here the Full state is mentioned : https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/install-upgrade/2-0/b_Cisco_UCSC_Install_and_Upgrade_Guide_2_0.pdf
  4. Huberttheman 👍 2
    Import Methods You can use one of the following methods to import and update a system configuration through Cisco UCS Manager: Merge—The information in the imported configuration file is compared with the existing configuration information. If there are conflicts, the import operation overwrites the information on the Cisco UCS instance with the information in the import configuration file. Replace—The current configuration information is replaced with the information in the imported configuration file one object at a time.
  5. elper 👍 2 Answered D
    It cannot be C. As per the document below, a logical configuration backup doesn't store chassis, FEX, IOMs, blade/rack servers information. https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/4-2/b_Cisco_UCS_Admin_Mgmt_Guide_4-2/m_backup_and_restore_configuration.html
Show 14 more comments
  1. naleenh 👍 2
    Full-state format is not XML. IT is binary.
  2. JGBARRIO 👍 2
    It´s B
  3. Rocky_Truth 👍 1 Answered C
    To accomplish the task of backing up and restoring the Cisco UCS Manager configuration with XML encoding on a remote server, the engineer should perform a logical configuration backup and run the replace import method. This will include the configurations of the chassis, FEX, rack servers, IOMs, and blade server and store them on the remote server in XML encoding
  4. Huberttheman 👍 1 Answered C
    Could be either C or D but I think I will vote for C Configuration Logical—Backs up up all configuration information but not AAA (Authentication, Authorization, and Accounting) related information. Configuration System—All AAA-related information.
  5. behnia 👍 1
    you are right, system configuration with preserved identities checked. System Configuration—The backup file preserves identities for Chassis, FEX, Rack Servers, and user labels for Chassis, FEX, Rack Servers, IOMs and Blade Servers.
  6. RFV147 👍 1
    niulf, yes, It is binary, but only full state is used for restore. Other types cannot be used for restore. So either the questions is incorrect, and instead the XML should be bin in the question , or there is no correct answer
  7. Mustafa 👍 1 Answered D
    System Configuration—The backup file preserves identities for Chassis, FEX, Rack Servers, and user labels for Chassis, FEX, Rack Servers, IOMs and Blade Servers.
  8. warCZert 👍 1 Answered D
    D is correct. ( a - all cannot be "restored", b - full is binary, c - incomplete content)
  9. bizzar7774 👍 1 Answered D
    D is correct : configurations of the chassis, FEX, rack servers, IOMs, and blade server.
  10. KoalaMan 👍 1 Answered A
    Only A creates an XML backup of all the listed PHYSICAL components.
  11. Clem7894 👍 1 Answered D
    D is correct with "Preserved Identities" checkbox checked
  12. niulf 👍 1
    Full state is binary file. So I think it should be D.
  13. Gayan84 👍 1
    The Answer is ''D"
  14. jwba 👍 1 Answered D
    D is correct

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

Practice All 350-601 Questions

Access 197 questions with complete answers and detailed explanations.

View Full 350-601 Practice Test →

← Back to 350-601 Study Guide