LAN-Based Backup Job Steps in Huawei Storage

H13-611 By islever Editorial Last updated

Storage Data Protection Technologies and Applications

Short answer

CD In a LAN-based backup, the agent on the application server sends data to the backup media server, which then sends the data to the backup device.

Question

Which of the following are correct steps in a LAN based backup job? (Choose all that apply.)
  1. Agent on application server sends data to the backup device.
  2. Backup server sends a “start-backup” command to the backup device.
  3. Agent on application server sends data to backup media server. Correct Answer
  4. Backup media server sends data to the backup device. Correct Answer

Key Takeaways

Distinguishes between the control plane (Backup Server commands) and data plane (Agent to Media Server to Device).

Identifies the correct steps in a LAN-based backup job involving the agent, media server, and backup device. The correct answers are C and D.

Common mistake: Choosing A because one might think the agent writes directly to storage, ignoring the role of the Media Server in managing the backup device.

Expert Analysis

LAN-based backup architecture relies on a client-server model where the Backup Server (or management server) orchestrates the job, but does not handle raw data traffic. The Backup Agent resides on the source application server and is responsible for reading and compressing/packing the data.

The correct sequence in a LAN backup scenario is:

  1. The Backup Server instructs the Agent to start the backup.
  2. The Agent sends data to the Backup Media Server (Option C). This is the critical data path over the LAN.
  3. The Backup Media Server sends data to the backup device (Option D), such as a tape library or disk target.

Why other options are incorrect:

  • Option A is wrong because the agent does not send data directly to the backup device; it goes through the media server which manages storage resources.
  • Option B is wrong because the Backup Server sends commands to the Agent to start the backup, not directly to the backup device (tape drive/disk) without going through the media server logic.

Exam Strategy

Always distinguish between the 'Control Plane' and 'Data Plane' in storage questions. The Backup Server controls; the Media Server moves data; the Agent reads source data. Never assume direct Agent-to-Device transfer unless specified as LAN-Free.

Frequently Asked Questions

What is the role of the Backup Media Server?

The Backup Media Server acts as an intermediary that receives data from the Agent and writes it to the backup device (tape/disk).

Does the Backup Server handle data traffic?

No, the Backup Server typically only handles command and control signals, while the Media Server handles the actual data movement.

More H13-611 FAQ →

Community Votes

C
50%
D
50%

50% of anonymous learners picked answer C. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 1 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 1

  1. ThaeGyii 👍 1
    C. Agent on application server sends data to backup media server: The backup server initiates the job, telling the Backup Agent installed on the application server to read the data. The agent then packs the data and streams it across the local area network (LAN) to the designated Backup Media Server.D. Backup media server sends data to the backup device: The Media Server acts as the data traffic manager. It receives the incoming stream from the agent, coordinates data indexing or deduplication processing if necessary, and writes the data blocks directly into the destination target device (such as a disk array or physical tape library).

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

← Back to H13-611 Study Guide