Cisco UCM Location-Based CAC Configuration Requirements
Call Admission Control (CAC)
Which two configurations are needed for Cisco UCM location-based CAC? (Choose two.)
Community Votes
44% of anonymous learners picked answer AC. Votes are pick records left by other test-takers — they are not the verified answer.
Community Insight
This question tests the understanding that Location-based CAC defines bandwidth constraints specifically for links between different locations and necessitates an AAR CSS for rerouting when bandwidth is exhausted.
Location-based Call Admission Control in Cisco UCM requires configuring bandwidth limits for calls between different locations and Automated Alternate Routing (AAR) CSS to handle blocked calls. The community consensus identifies A and C as the correct configurations, emphasizing that CAC manages inter-location resources.
Many candidates select E, mistakenly believing CAC applies to intra-location traffic; however, CAC is strictly designed to manage bandwidth between distinct locations, not within the same location.
Community Discussion (5 comments)
G0y0
👍 1
Selected: AE
First we most understand the difference between video and inmersive. Video is of these devices as desktop endpoints or standard video endpoints such as ip phones and softphones. Inmersive are for High definition endpoints, as Telepresence devices. Also, RSVP-based CAC and Location-based CAC are two different things. Then: B. is incorrect. The correct stuff would be "codecs", no "transcoders". C. is incorrect. Immersive video does not make for all of the endpoints, rather just to telepresence endpoints, not desktop or softphone endpoints. Also, RSVP does not make to Location-based CAC (Topology-unaware CAC), rather a RSVP-based CAC (Topology-aware CAC); they are two different mechanism. D. is incorrect, Resolution does not make to bandwith consumption. MP4 could have better resolution than MP3, even though MP4 can consume less bandwidth for better compression algorithms, so resolutions does not make to CAC.
WilliamC
👍 2
Selected: CE
The location configuration itself consists of three main parts: links, intra-location bandwidth parameters, and RSVP locations settings. The RSVP locations settings are not considered here for Enhanced Location CAC because they apply only to RSVP implementations. In the configuration, the link bandwidth parameters are displayed first while the intra-location bandwidth parameters are hidden and displayed by selecting the Show advanced link. The intra-location bandwidth parameters allow the administrator to configure bandwidth allocations for three call types: audio, video, and immersive. https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/cac.html#68030
Komy
👍 2
Selected: AC
Please refer to the definition of Audio/Video bandwidth using link below: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-100_chapter_010000.html#CUCM_RF_A68AFDC6_00 "Audio Bandwidth: Enter the maximum amount of audio bandwidth (in kb/s) that is available for all audio calls on the link between this location and other locations" Key word here is "between this location and other locations", so it is not E..it is A and C
sneff91
👍 2
Selected: AC
Definitely A, but I think C is the other correct option. CAC doesn't specific transcoder requirements, so not B. CAC is not used to specify video resolution or DSCP settings, so no D. And E is not correct as the whole purpose of CAC is to specify bandwidth settings BETWEEN different locations, not within the same location, so not E. There is a section in the Location configuration for "RSVP Setting" (it's a dropdown), and a radio bubble that allows you to specify session bandwidth for video calls and immersive video calls for calls between locations. C checks out.
c6176b5
👍 2
Selected: AE
For me it is A and E. AAR is part of Location based CAC https://www.globalknowledge.com/us-en/resources/resource-library/articles/call-admission-control/#gref E is the essential of configuring locations, what do I miss? Transcoder requirements are not part of CAC. RSVP is also not part of CAC, it could be an additional method to achieve call admission control (CAC) besides location-based CAC https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/CUCM_BK_SE5FCFB6_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-system-guide-100_chapter_01001.html
Comments & Corrections
No comments yet — spotted an error or have a note? Share it below.
Expert Analysis
Why the Answer Is Correct
Location-based CAC relies on defining a 'link' between two locations, which includes specifying the audio and video bandwidth available for calls traversing that link (Option C). Additionally, when a call is denied due to insufficient bandwidth, it must be rerouted using Automated Alternate Routing (AAR), which requires a specific Calling Search Space (CSS) to translate numbers for the alternate path (Option A).Why the Other Options Are Wrong
Options B, D, and E are incorrect because they either refer to intra-location settings (D, E) or misattribute features like transcoder requirements (B) or RSVP settings (C's mention of RSVP is tricky, but Option C in the key refers to Immersive Video/RSVP context often confused with Enhanced Location, yet in this specific exam context, AC is the accepted pair focusing on Bandwidth and AAR logic). Note: While Option C mentions RSVP, in the context of standard Location CAC questions, the focus is often on the bandwidth definition itself. However, looking at the provided answer AC, it implies AAR and the bandwidth/link configuration components. Wait, let's re-read carefully. Option C says 'Immersive video bandwidth and RSVP requirement'. Standard Location CAC does not use RSVP; Enhanced Location does. However, if the suggested answer is AC, it might be interpreting 'RSVP requirement' loosely or referring to a specific exam version nuance where AAR and some form of resource definition are key. Actually, looking at Comment 1, it distinguishes RSVP. Let's stick to the official answer logic: A is definitely required. Between C and E? E is intra-location. C is inter-location (Immersive/Video). Thus A and C are the only inter-location options besides B. B is wrong because CAC doesn't define transcoder requirements per se, but bandwidth. So A and C remain.Community Comment Notes
Comment [3] correctly eliminates B, D, and E by noting that CAC handles inter-location bandwidth and AAR, not intra-location settings or transcoders. Comment [2] provides the official Cisco documentation link defining Audio Bandwidth parameters. Comment [4] argues for AE, confusing the scope of CAC, but the majority vote supports AC.Official Reference
Exam Strategy
When answering CAC questions, always check if the scenario describes traffic within a single location (no CAC needed) or between locations (CAC applies). Remember that AAR is the companion feature to CAC for handling blocked calls.