DSCP Service Parameters for Cisco Telepresence Audio

350-801 By islever Editorial Last updated

Short answer

C DSCP for audio portion of Cisco Telepresence calls

Question

Which DSCP service parameter is configured for Cisco TS endpoints and Cisco Communication Manager endpoints?
  1. DSCP for audio portion of video calls
  2. DSCP for audio calls
  3. DSCP for audio portion of Cisco Telepresence calls Correct Answer
  4. DSCP for video calls

Key Takeaways

The exam tests attention to detail regarding specific configuration field names; the trap is confusing standard video call audio with specialized Telepresence audio parameters.

This question tests knowledge of specific DSCP service parameter naming conventions in CUCM. The correct setting is explicitly named 'DSCP for audio portion of Cisco Telepresence calls' to distinguish it from standard video call audio.

Common mistake: Candidates often select 'DSCP for audio portion of video calls' because they assume all video calls use the same audio DSCP marking, missing the specific distinction for Cisco Telepresence endpoints.

Expert Analysis

Why the Answer Is Correct

The correct answer is C because Cisco Unified Communications Manager (CUCM) maintains distinct service parameters for different media types. Specifically, there is a unique parameter labeled "DSCP for audio portion of Cisco Telepresence calls" designed to handle the differentiated services code point requirements for high-definition Telepresence audio streams separately from standard video.

Why the Other Options Are Wrong

Option A refers to standard video calls, which use a different service parameter than Telepresence-specific setups. Option B applies only to pure audio calls (voice), not mixed media. Option D refers to the video payload itself, not the audio component. Confusing these categories leads to incorrect QoS application.

Community Comment Notes

Community discussion highlights ambiguity in older exam dumps versus current documentation. While some users argue for Option B due to slight wording variations in titles, official Cisco documentation confirms the existence of the specific Telepresence audio parameter. It is crucial to recognize that Telepresence has its own dedicated DSCP settings separate from general video or voice.

Official Reference

Array

This link opens the official vendor documentation in a new tab.

Exam Strategy

When studying CUCM service parameters, memorize the exact naming conventions rather than just the concepts. Pay special attention to parameters that differentiate between 'Video Calls', 'Telepresence Calls', and their respective audio portions, as exams often test this granularity.

Community Votes

C
100%

100% of anonymous learners picked answer C. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 5 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 5

  1. Dutchviking 👍 2
    The correct answer should be B. There is no such parameter "DSCP for Audio Portion of CISCO TelePresence Calls", it is called DSCP for Audio Portion of TelePresence Calls. Therefore B is correct: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_01000001.html
  2. Ismars 👍 2 Answered C
    https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_01000001.html
  3. Dutchviking 👍 2
    Sorry A is the correct answer: DSCP for Audio Portion of Video Calls
  4. Komy 👍 1 Answered C
    Based on link below, A,C seem to be correct; https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_01000001.html "This section of service parameters includes clusterwide DSCP values for a wide range of audio and video call types, including DSCP for audio calls, video calls, the audio portion of a video call, TelePresence calls, and the audio portion of a TelePresence call."
  5. b3532e4 👍 1
    This section of service parameters includes clusterwide DSCP values for a wide range of audio and video call types, including DSCP for audio calls, video calls, the audio portion of a video call, TelePresence calls, and the audio portion of a TelePresence call. It is highly recommended that you keep these parameters set to the default value unless a Cisco support engineer instructs otherwise.

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

← Back to 350-801 Study Guide