DCNM Absolute-Value Traffic Thresholds
Short answer
A Select Use absolute values in the DCNM Performance Manager Configuration Wizard so the 39913690-byte maximum applies directly to the collected statistics.
Question
is to configure a maximum limit of 39913690 bytes that applies directly to the statistics collected as a ratio of the total link capacity. Which DCNM performance
monitoring configuration parameter must be implemented to achieve this result?
Key Takeaways
The exam tests the DCNM wizard's absolute-versus-baseline threshold choice; the trap is reading 'ratio of the total link capacity' as a percentage trigger when a fixed byte limit points to absolute values.
This 350-601 question tests which DCNM performance-monitoring parameter enforces a fixed 39913690-byte ceiling on collected statistics. The answer is A, Absolute Values, because absolute thresholds apply directly to the gathered counters while Util% and Baseline do not.
Common mistake: Option C, Util%, is the most plausible wrong answer because the question mentions a ratio of total link capacity, but a percentage threshold cannot express a specific 39913690-byte maximum applied directly to collected statistics.
Expert Analysis
The governing principle Cisco DCNM's Performance Manager wizard forces a choice between two threshold families on its final screen: absolute-value thresholds and baseline thresholds. The documented behaviour of the absolute-value path is that it applies a fixed limit directly to the statistics gathered in the collection, and those gathered statistics are expressed as a percentage of the total link capacity before being compared with the configured threshold. That single documented sentence is what decides this question.
Mapping the requirement The administrator specifies a hard ceiling of 39913690 bytes that must apply directly to the collected statistics, expressed as a ratio of total link capacity. A fixed byte count entered against the raw collected counters is exactly the absolute-value mechanism: you type the maximum byte (or packet) value, and DCNM raises an event when the gathered statistic crosses it. Option A therefore matches both the byte-denominated limit and the "applies directly to the statistics collected" wording in the requirement.
Why the other options fail Option C (Util%) is the trap: the phrase "ratio of the total link capacity" tempts you toward a percentage trigger, but Util% compares a utilisation percentage against a percentage threshold, not a specific 39913690-byte figure against the statistics themselves. A raw byte ceiling cannot be expressed as a percent without knowing link speed, which the question never supplies. Option B (Baseline) derives its threshold from historical baseline data rather than a fixed limit, so it cannot honour a mandated byte value. Option D (Per Port Monitoring) is only the scope of collection — it decides which ports are sampled, not the unit or basis of the threshold.
So the correct choice is A, implemented by clicking the Use absolute values radio button on the last screen of the Performance Manager Configuration Wizard.
Exam Strategy
On DCNM wizard questions, first identify the unit of the limit: a fixed byte or packet figure means absolute values, a percentage of link speed means Util%, and historical data means baseline. Then check whether the requirement says the threshold applies directly to the collected statistics, which is the documented signature of the absolute-values radio button. Ignore scope options such as Per Port Monitoring unless the question asks which ports are sampled rather than how the trigger is calculated.
Frequently Asked Questions
Why does a 39913690-byte limit mean Absolute Values instead of Util%?
What is the difference between baseline and absolute thresholds in DCNM?
Where in the Performance Manager Configuration Wizard are absolute thresholds set?
Community Votes
50% of anonymous learners picked answer C. Votes are pick records left by other test-takers — they are not the verified answer.
Discussion 6 contributions
Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.
From public community threads 6
-
jquesada 👍 6Looks like A is the correct answer: "Use absolute values radio button on the last screen of the Performance Manager Configuration Wizard to configure thresholds that apply directly to the statistics gathered. These statistics, as a percent of the total link capacity, are compared to the percent utilization configured for the threshold type"
-
GG345 👍 3answer is A - absolute values You must choose either absolute value thresholds or baseline thresholds that apply to all transmit or receive traffic defined in the collection. Click the Use absolute values radio button on the last screen of the Performance Manager Configuration Wizard to configure thresholds that apply directly to the statistics gathered. These statistics, as a percent of the total link capacity, are compared to the percent utilization configured for the threshold type. If the statistics exceed either configured threshold, an event is shown on the DCNM-SAN web client Events tab. look for 'Using Performance Thresholds' - https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/11_x/fundamentals/cisco_dcnm_fundamentals_guide_11/monitoring_performance.html
-
Krans 👍 1 Answered CThe answer is C: Util%. The question wants alerts when traffic exceeds a percent utilisation threshold, measured as a ratio of the total link capacity. That’s exactly what Util% does: it triggers when usage passes a set percentage of the link’s capacity. A, Absolute Values: A fixed raw number that ignores link capacity. The “39913690 bytes” figure is there to tempt you into this one. B, Baseline: Compares traffic with the link’s normal historical pattern, not with its capacity. D, Per Port Monitoring: Controls where monitoring applies, not how the threshold is measured.
-
GG345 👍 1now that I read more- im confused between absolute value and Util%
-
GuyThatTakesDumps 👍 1 Answered AA is correct!
Show 1 more comment
-
alexshang 👍 1C: Util%?
Reader comments & corrections
No reader corrections yet — spotted an error or have a note? Share it below.
Related Analysis
Practice All 350-601 Questions
Access 197 questions with complete answers and detailed explanations.
View Full 350-601 Practice Test →