Replacing AC Adapter After Power Outage Failure

220-1201 By islever Editorial Last updated

Given a scenario, troubleshoot motherboards, RAM, CPUs, and power Given a scenario, install the appropriate power supply

Short answer

A Replace the AC adapter first as it is the most common point of failure after a power surge due to its exposure to external electrical fluctuations.

Question

Following a power outage, a laptop will not turn on. Which of the following should a technician replace first to resolve the issue?
  1. The AC adapter Correct Answer
  2. The RAM
  3. The inverter
  4. The battery

Key Takeaways

The main trap is jumping to internal components like RAM or the battery; the key insight is that external power adapters are the most vulnerable to grid-related surges and are the easiest to test.

Learn why a technician should replace the AC adapter first when a laptop won't turn on after a power outage. This CompTIA A+ 220-1201 question covers power surge troubleshooting.

Common mistake: Technicians often incorrectly choose the battery (D) because laptops run on batteries, but batteries rarely fail simultaneously with an outage unless the surge penetrated deeply, whereas the adapter is the first line of defense and commonly burns out.

Expert Analysis

Power Surges Target External Power Sources

The scenario describes a laptop that fails to power on immediately following a power outage. The primary concern during such events is electrical instability, including voltage spikes or surges, which can damage sensitive electronic components. When troubleshooting this specific sequence of events, the technician must prioritize components most vulnerable to external power fluctuations.

AC Adapter Vulnerability The AC adapter (or power brick) converts alternating current from the wall outlet into direct current for the laptop. It is an external component exposed directly to the building's power grid. Because it lacks the internal protection mechanisms found in more complex subsystems, it is highly susceptible to damage from power surges. A damaged AC adapter will fail to deliver power, resulting in a laptop that appears dead.

Troubleshooting Hierarchy: Easiest to Hardest In IT certification logic, technicians should always begin with the simplest, most accessible, and least expensive component before moving to internal hardware. Replacing the AC adapter is quick and requires no disassembly. In contrast, replacing RAM (Option B), the inverter (Option C), or the battery (Option D) involves opening the chassis or dealing with internal components. Furthermore, these internal components are less likely to be the first point of failure caused specifically by a power outage compared to the external power supply unit.

Why Other Options Are Incorrect While batteries (Option D) can fail, they are generally robust against brief outages. The inverter (Option C) powers the LCD screen backlight, not the entire system; if the inverter failed, the laptop might still turn on but appear dark. RAM (Option B) corruption is possible but rare from simple outages, and swapping it is a much more invasive step than checking the power source. Therefore, verifying and replacing the AC adapter is the correct first step.

Exam Strategy

When troubleshooting power issues, always start with the path of electricity from the source to the device. Check the outlet, then the cable/adapter, then the battery, and finally internal components. This 'outside-in' approach minimizes downtime and physical effort, which is a core principle for CompTIA A+ troubleshooting questions involving hardware failures.

Frequently Asked Questions

Why not check the battery first?

Batteries are internal and harder to access. The AC adapter is external and statistically more likely to fail from a power surge. You check the easiest fix first.

Does a power outage damage RAM?

It is rare. While data loss occurs, physical hardware damage to RAM from a standard outage is uncommon compared to the vulnerability of the AC adapter.

More 220-1201 FAQ →

Community Votes

A
100%

100% of anonymous learners picked answer A. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 2 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 2

  1. Afie 👍 1 Answered A
    "Following a power outage, a laptop will not turn on." Power outages are often accompanied by power fluctuations or surges that can damage the AC adapter. When troubleshooting a laptop that will not power on after such an event, the first and easiest component to test or replace is the AC adapter.
  2. Macwell2 👍 1 Answered A
    A is correct

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

Practice All 220-1201 Questions

Access 105 questions with complete answers and detailed explanations.

View Full 220-1201 Practice Test →

← Back to 220-1201 Study Guide