VMware
Advanced VMware Cloud Foundation 9.0 Networking (3V0-25.25) practice questions
- Questions
- 50
- Exam length
- 135 min
- Passing score
- 300
- Instant feedback per question
- Explanation for every option
- Free, no signup
Exam overview 3V0-25.25
Tracing a packet across a Tier-0 gateway running ECMP — and knowing why a stateful service would break that forwarding model — is the layer of judgment 3V0-25.25, the Advanced VMware Cloud Foundation 9.0 Networking exam, is written for. Passing leads to the VMware Certified Advanced Professional – VMware Cloud Foundation 9.0 Networking credential (VCAP-Networking), delivered by Broadcom through Pearson VUE. The exam carries 60 questions in 135 minutes, needs 300 on the 100-500 scaled scale, and mixes multiple choice and selection with drag and drop, matching, build-list and sequencing.
NSX administrators and data center network architects stepping fully into software-defined networking are the intended audience — the announcement assumes one to two years of NSX design and administration on top of broader enterprise networking experience. Preparation that sticks means walking the creation flows rather than reading about them: building a Tier-0 and then a Tier-1 gateway, deploying an NSX Edge cluster, configuring Stateful Services, Projects and Tenancy, spinning up VPCs and Logical Segments, and sketching a Federation design for multisite.
Blueprint objectives concentrate on NSX mechanics rather than survey-level networking: centralized versus distributed connectivity decisions, packet walks through logical routing, ECMP and high availability behavior, connectivity and routing troubleshooting, and choosing the right VCF tool when an NSX issue surfaces. Multisite design and NSX Fleet considerations round out the plan-and-design set.
Practice here follows the same thread. A question may show a do-not-fragment ping failing at 1472 bytes and ask what that MTU signature points to; the explanation then walks the diagnosis and the distractors in order. Each practice question is paired with a detailed answer explanation, and running the set against a 135-minute clock turns pacing into muscle memory before the real testing window opens.
Sample questions 5 of 50 shown
-
Q1
An administrator has a vSphere 8.0 environment that is not currently running NSX. How can the administrator converge this vSphere 8 environment into a VMware Cloud Foundation (VCF) management domain?Converting a vSphere-only environment (without NSX) into a VCF management domain is done with the VCF Installer's convergence workflow, which requires the vSphere environment to be at version 9.0 first. Because the environment does not run NSX, NSX does not need to be installed or upgraded manually — the convergence process handles NSX deployment as part of bringing the environment under VCF management. VCF Operations is a fleet-operations/monitoring tool and is not used to converge environments. Pre-installing NSX manually (option B/D) is unnecessary and creates an unsupported configuration, since the installer expects to deploy NSX itself during convergence. -
Q2
A cloud service provider runs VPCs with differing traffic patterns: Some VPCs are generating high large North/South flows. Most of the VPCs generate very little traffic. The architect needs to optimize Edge dataplane resource consumption while ensuring that noisy VPCs do not impact others. Which optimization satisfies the requirement?VPCs can be backed by VRF-lite gateways, which allows multiple VPCs to share a single Tier-0 gateway while keeping their routing tables isolated. By deploying multiple Edge clusters and distributing VRF-backed VPCs according to their traffic profiles, the provider isolates high-throughput "noisy" VPCs onto dedicated Edge clusters while low-traffic VPCs share resources elsewhere. This optimizes Edge dataplane capacity and guarantees fault and performance isolation between tenants. Converting VPCs to VLAN segments (B) breaks the VPC abstraction, consolidating namespaces (C) removes tenant isolation, and dedicating one Edge node per high-traffic VPC (D) wastes resources and provides no protection against noisy neighbors. -
Q3
To which component does the hyperbus interface (vmk50) provide network connectivity?In NSX, when container host agents (such as the NSX Container Plugin / container service) run on ESXi transport nodes, a special hyperbus network interface (vmk50) is created on the host. The hyperbus provides network connectivity between the containers running on that ESX transport node and the NSX management/control plane, enabling container networking features (CNI integration, pod networking) to be programmed by NSX. It is a host-local interface for container traffic on the transport node, not a general interface for VM-to-VM communication. -
Q4
An administrator is troubleshooting why workloads in NSX cannot reach the external network 10.100.0.0/16. The Tier-0 Gateway is in Active/Active mode and has the following configuration: Uplink-1 (VLAN 100): 192.168.100.0/24 → router R1 at 192.168.100.1 Uplink-2 (VLAN 101): 192.168.101.0/24 → router R2 at 192.168.101.1 A static route for 10.100.0.0/16 was added with both next-hops (192.168.100.1 and 192.168.101.1) The Scope of this route is set to Uplink-1 Symptoms: Virtual Machines (VMs) cannot reach 10.100.0.0/16 Traceroute from the VM stops at the Tier-0 gateway with "Destination Net Unreachable" Pings from the Edge nodes to both 192.168.100.1 and 192.168.101.1 are successful What explains why workloads in NSX cannot reach the external network?In NSX, the Scope of a static route restricts the route to specific interfaces/scheduling. Here the next-hops 192.168.100.1 (VLAN 100) and 192.168.101.1 (VLAN 101) live on two different uplinks, but the route's Scope was set only to Uplink-1. The Tier-0 cannot resolve/reach a next-hop that falls outside the route's scope, so the route is not installed correctly and the SR returns "Destination Net Unreachable" to traffic from the VMs. The Edge nodes themselves can ping both routers because their uplink interfaces are up and directly connected — the failure is in the static route definition, not physical reachability. Next-hops must always be the peer router IPs (so B is wrong), and physical return routes are not implicated because the packet never leaves the Tier-0 (so A is wrong). -
Q5
The NSX Manager is reporting the following open alarm: Remote Logging Not Configured The administrator has verified that remote logging is enabled for the NSX Manager and NSX Edge nodes. However, the alarm is still open in NSX Manager. Which statement explains why the Remote Logging Not Configured alarm is still open?The "Remote Logging Not Configured" alarm in NSX is evaluated across all NSX components managed by the fabric, including the NSX Manager cluster, NSX Edge nodes, and the ESXi transport nodes. Even if remote (syslog) logging is correctly configured on the NSX Managers and Edges, the alarm remains open as long as one or more ESXi transport nodes are not configured to forward their log messages to a remote logging server. The fix is to update the transport node (host) logging configuration — for example via the transport node profile or by configuring syslog exporters on the remaining nodes — after which the alarm clears. UI re-login or alert suppression does not change the underlying condition.
Reader reviews 68 ratings
-
The 3V0-25.25 practice questions were incredibly helpful. The detailed explanations made all the difference. Passed on my first attempt!
-
Got 856 out of 900 on the 3V0-25.25 exam. This question bank was my primary study resource. Highly recommend.
-
My boss asked me to get the 3V0-25.25 cert for work. This was the best study tool I found. Passed in three weeks.
-
I was really impressed by the depth of the 3V0-25.25 answer explanations. Feels like having a tutor walk you through each question.
-
The 3V0-25.25 exam was brutal, but these practice questions prepared me for the worst. Came out with a solid pass.
-
Three of my coworkers used this for 3V0-25.25 and all passed. Figured I’d give it a shot — worked like a charm.
Frequently asked questions
What does sitting 3V0-25.25 cost, and what does a second attempt add?
Registration is a flat USD 250 — third-party listings are consistent on that figure, and it is single-use: a failed attempt means paying the fee again for the rebooking, after the standard waiting period between attempts. Since 300 is a scaled threshold rather than a raw count, budget for the retake scenario by preparing to clear the bar comfortably, not marginally.
How are the Tier-0 and Tier-1 gateway creation flows tested?
As process questions: given a scenario, identify the correct order and the correct construct — which gateway terminates north-south, which one serves tenant segments, where a stateful service is legal. The objectives phrase it exactly that way, and the distractors usually shuffle steps that look interchangeable. Sequencing them correctly in practice is what makes the ordering automatic on exam day.
When does ECMP beat active-standby on a Tier-0?
ECMP distributes traffic across equal-cost paths and suits stateless forwarding at scale, while active-standby preserves the state affinity that stateful services require. The exam frames this as a design judgment — pick the mode the workload's service mix demands — and the explanations walk why the wrong mode fails rather than merely which mode is listed.
What does a command-line question look like in the bank?
By showing the output, not describing it: a do-not-fragment ping that returns a fragment-needed message, a routing table missing an expected prefix, and the reasoning chain that turns the output into a diagnosis. Each practice question ties the symptom back to an official objective, so you rehearse reading evidence the way the real items present it.
How much NSX experience is realistic before booking?
The exam announcement targets professionals with one to two years of NSX design and administration and at least two years in enterprise networking, comfortable across the UI, CLI and API workflows. Without that depth, the scenario items read as noise rather than signal — extend your lab time until the creation flows feel routine, then schedule.
Is a single mock exam pass a green light to book?
Not on its own. One clean run may reflect a friendly question draw, so look for consistent scores above the bar across timed attempts, and remember the scaled score cannot be reverse-engineered from practice results. What a mock exam does give you is pacing evidence and a per-topic miss list — use both to decide when the booking is actually safe.