3V0-22.25 Advanced VMware Cloud Foundation 9.0 Operations exam badge

VMware

Advanced VMware Cloud Foundation 9.0 Operations (3V0-22.25) practice questions

★★★★★★ 4.8 35 reviews — aggregated from community votes by visitors who practiced this bank

Questions
33
Exam length
135 min
Passing score
300
  • Instant feedback per question
  • Explanation for every option
  • Free, no signup

Exam overview 3V0-22.25

Two hundred VMs marked for a twelve-month migration, and a What-If scenario that reserves their headroom as committed demand so the next project cannot quietly spend it — that is the kind of judgment call 3V0-22.25, the Advanced VMware Cloud Foundation 9.0 Operations exam, asks you to make. Passing leads to the VMware Certified Advanced Professional – VMware Cloud Foundation 9.0 Operations credential (VCAP-VCF Operations), delivered by Broadcom through Pearson VUE. The paper carries 60 questions in 135 minutes and requires 300 on a 100-500 scaled score; that figure is not a percentage of correct answers. Item formats run from multiple choice and multiple selection through drag and drop, matching, build-list and sequencing.

Day-2 operators, capacity planners and VCF administrators are the likely candidates. Useful preparation is hands-on: model add and remove workload scenarios with hosts and HCI nodes, set a cluster headroom percentage, then compare what a rightsizing recommendation does when you schedule the vCPU reduction instead of applying it live. Time spent in Fleet Management — syncing inventory before a vertical scale-up, rotating a certificate chain, resetting a lost administrator password with the command-line utility — pays off, as does walking through Reclaim Capacity against powered-off VMs, idle VMs, old snapshots and orphaned disks.

Broadcom publishes a general five-section outline — IT architectures, technologies and standards; VMware products and solutions; plan and design; install, configure and administrate; and troubleshoot and optimize — without per-section weights, so no single area can be safely deprioritized. The questions concentrate on operational decisions: allocation-versus-demand capacity models and custom profiles, capacity forecasting with What-If scenarios and committed demand, cost drivers with rate cards and chargeback, Operational Intent modes against Business Intent tags, Service Discovery and Telegraf collection, Management Packs, Super Metrics, and configuration drift detected through source control.

Practice here is built around those same calls. A question may hand you an oversized VM with a default four-vCPU reduction and ask which action schedules half of it during a maintenance window; the explanation then shows why Rightsize carries the recommendation where Automation Central or a vSphere scheduled task does not. Each online practice question comes with a detailed answer explanation covering the reasoning and the distractors. Run the bank as a 135-minute timed set to get used to the item mix, then use the explanations to guide focused revision and work toward passing.

Sample questions 4 of 33 shown

  1. Q1
    An administrator has been tasked with scaling an existing VCF instance that consists of one workload domain that uses vSAN as its principal storage. The following requirements must be met: Add an additional workload domain. Manage the new workload domain from the existing vCenter. Which two actions must the administrator take to successfully complete the objective? (Choose two.)
    1. Ensure the new workload domain uses the same SSO domain as the existing workload domains.
    2. Ensure the existing workload domain uses the same NSX Manager as the management domain.
    3. Ensure the new hosts are commissioned with the valid storage type and mapped to a network pool prior to domain creation.
    4. Configure vCenter Enhanced Link-mode to link the two workload domain vCenters.
    5. Ensure the new workload domain is configured using vSAN storage with compatible disks installed.
    6. Create a vCenter Linking Group to link the two workload domain vCenters.
    Before a new workload domain can be added, the new hosts must be commissioned with a valid storage type and mapped to a network pool; VCF cannot consume hosts that are not prepared in inventory. To manage the new workload domain from the existing vCenter, a vCenter Linking Group links the workload domain vCenters under the existing management point. Sharing an SSO domain or an NSX Manager is not a requirement for this objective, and Enhanced Link-mode alone does not make VCF manage the workload domain.
  2. Q2
    An administrator successfully integrated VCF Operations fleet management with a Microsoft Certificate Authority and deployed certificates to vCenter, NSX, VCF Operations, and ESX hosts successfully in the past. VCF Operations fleet management has begun presenting errors that all certificates are nearing expiration no matter how often it is cleared. Examining the configuration the administrator sees that the automatic renew did successfully rotate certificates on all systems a week ago, and the certificate template is set to allow for all certificates to last one year. What is the reason that certificates warnings are still being generated?
    1. The Microsoft CA Root or Intermediate certificates are nearing expiration.
    2. The certificate alert in VCF Operations has not been properly cleared.
    3. SDDC Manager has lost contact with the Microsoft CA.
    4. The administrator must manually click “Renew Certificate” on desired items.
    The validity of any issued certificate is bounded by the validity of the CA chain that signed it. The leaf certificates were rotated successfully and the template permits one year, so if every certificate still reports nearing expiration, the Microsoft CA Root or Intermediate certificate itself is close to expiry. Replacing or renewing the CA chain certificate resolves the warnings; clearing the alert or manually renewing leaf certificates does not change the underlying chain expiry.
  3. Q3
    An administrator is responsible for scaling up VMware Cloud Foundation Operations vertically by using Fleet Management. When the administrator initiates the Vertical Scale Up operation for the VCF Operations component, the workflow enters a “Needs Attention” state, indicating that the Fleet Management inventory information is not current. Which action must the administrator take to allow the scale-up process to continue?
    1. The administrator must take the VCF Operations cluster offline.
    2. The administrator must take the mandatory snapshots.
    3. The administrator must scale up the Cloud Proxies.
    4. The administrator must perform the inventory sync.
    Fleet Management drives scale operations from its own inventory of the deployed components. When that inventory is stale, the workflow pauses in “Needs Attention” rather than acting on outdated data. Performing an inventory sync refreshes the current state of the VCF Operations cluster and allows the Vertical Scale Up workflow to proceed. Taking the cluster offline, taking snapshots, or scaling Cloud Proxies does not refresh Fleet Management inventory.
  4. Q4
    An administrator is trying to configure an action-based notification in VCF Operations. When trying to set the Outbound Method, the administrator is not able to continue. What type of Plugin must the administrator configure to successfully compete the task?
    1. Log File
    2. SMTP Trap
    3. Standard Email
    4. Webhook Notification
    Action-based notifications in VCF Operations deliver an outbound payload to an external system and require the Webhook Notification plugin to be configured before an Outbound Method can be selected. Log File, SMTP Trap, and Standard Email plugins cover other notification paths and do not enable action-based (webhook) outbound delivery.

Answer all 33 questions with instant feedback →

Reader reviews 35 ratings

4.8 ★★★★★★ Based on 35 ratings
  • The 3V0-22.25 questions were tougher than the actual exam, which honestly made me more confident. Great prep tool.

    ★★★★★★ Brandon L.

  • I had almost given up on 3V0-22.25 after failing twice. These questions pinpointed exactly what I was missing. Third time’s the charm!

    ★★★★★ Noah S.

  • Best 3V0-22.25 prep I’ve found online. The question pool is deep and the randomized practice mode keeps you on your toes.

    ★★★★★★ Mason T.

  • Highly recommended for VMware certification. The 3V0-22.25 practice questions are worth every penny.

    ★★★★★★ Andrew M.

  • I work full time and study at night. The 3V0-22.25 question bank allowed me to learn efficiently without wasting precious time.

    ★★★★★★ Harper S.

  • Quick shipping? LOL jk — instant access was great. Started studying 3V0-22.25 questions right after purchase, no delays.

    ★★★★★★ Colton W.

Log in to rate this exam and leave a review.

Frequently asked questions

Reserving migration capacity across several What-If scenarios — how does the exam treat it?

A migration spread over twelve months must not have its reserved headroom consumed by later projects. The exam expects a Committed Scenario, because that marks the migration VMs as committed demand, which other What-If models then treat as already allocated. Bundling the VMs into one scenario or picking a migration-planning category does not persist the reservation. Practising variants of this in the bank makes the exam's real decision points familiar before test day.

A default four-vCPU reduction with a maintenance window — which action does 3V0-22.25 expect?

Rightsize supports a Scheduled Action created directly from the recommendation, where you can adjust the size and pick a future execution time. That keeps the optimization inside the Rightsize workflow. Automation Central and a vSphere Scheduled Task carry no Rightsize recommendation context, and Reclaim handles reclamation rather than rightsizing. Working through that distinction in practice sharpens revision on a topic the paper revisits in more than one form.

Operational Intent versus Business Intent — which setting builds a 20% buffer?

The 20% buffer comes from Operational Intent Cluster Headroom, and placing workloads into as few clusters as possible is the Consolidate optimization mode. Business Intent tags and a Cluster Criticality Threshold do not implement headroom, and Balanced would spread workloads rather than consolidate them. The bank pairs both intent layers in the same scenarios so the wording becomes familiar and the choice feels straightforward under time pressure.

Telegraf agents on guest VMs — what does Service Discovery actually require?

Service Discovery is switched on at the vCenter adapter under Administration > Integrations, not enabled globally. Once a Telegraf agent is installed and running, it must be pointed at a cloud proxy by fetching and running that proxy's helper script, then restarting the service; it does not talk to the load balancer directly. Our explanations trace the mechanism behind each step, which helps you study efficiently and gives you a fair shot at passing.

Rate cards and provider pricing show up how in the questions?

In the provider-side scenario, VCF Operations pricing is enabled in the policy and configured under Provider Pricing. Because the rule charges by allocated vCPU rather than GHz, the compute rate is set to vCPU Count Based, and predefined VM sizes are represented by Base Rate Slabs using a greater-than-or-equal CPU threshold. Tag-based recurring charges are not part of that flow. Rehearsing these configurations makes the cost scenarios recognizable when they appear on screen.

Configuration drift reports a template OUT_OF_SYNC — what caused it?

OUT_OF_SYNC means the copy in the source control repository and the copy held by VCF Operations no longer match. Editing a template directly in the repo, deleting a template from the repo, or deleting the source control configuration itself all break that correspondence. Removing a template from a policy or a vCenter from the drift job only changes detection scope. Answer explanations tie each symptom back to the mechanism, turning a miss into useful revision.