Best Technology for Remote Server Configuration Across Countries

Server Hardware and Virtualization

A server administrator is configuring a new server in a data center in another country. Which of the following technologies should the administrator use to complete this task?

  1. IP KVM Source Reference Answer
  2. Crash cart
  3. Remote console
  4. Serial connection

Community Votes

A
83%
C
17%

83% of anonymous learners picked answer A. Votes are pick records left by other test-takers — they are not the verified answer.

Community Insight

The question tests the distinction between OS-level remote access (like RDP) and hardware-level remote management (IP KVM), with the trap being the assumption that any remote connection suffices for initial server configuration.

IP KVM is the optimal solution for remotely managing physical servers in distant locations, offering full BIOS and OS-level control. Community consensus confirms IP KVM over standard remote console or RDP due to its ability to handle pre-boot environments.

Community Discussion (4 comments)

PaytoPlay 👍 1 Selected: A
I would go a here considering its a server and I will most likely need to access BIOS for RAID boot order and security.
Stache 👍 1 Selected: A
They are trying to trip you up between RDP and remote console (terminal access), IP KVM best answer.
surfuganda 👍 3 Selected: A
A. IP KVM IP KVM (Keyboard, Video, Mouse over IP) allows administrators to control a server remotely over the internet or a network, providing access to the server's console as if they were physically present. This technology is particularly useful when direct physical access to the server is not possible, such as in scenarios where the server is in a different country. It supports keyboard, video (monitor), and mouse input, enabling complete remote management capabilities, including BIOS access, system rebooting, and troubleshooting at the pre-OS level.
AzadOB 👍 1 Selected: C
Remote console Remote console technology enables administrators to access and manage servers from a remote location over a network connection. This allows for configuration, troubleshooting, and maintenance tasks to be performed without the need for physical access to the server's location. While options like IP KVM (Keyboard, Video, Mouse over IP) and serial connections can also provide remote access capabilities, a remote console often offers a more comprehensive and user-friendly interface for managing servers remotely

Comments & Corrections

No comments yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

Submitted for moderation before publishing. Keep it helpful and respectful.

Expert Analysis

Why the Answer Is Correct

IP KVM (Keyboard, Video, Mouse over IP) provides a complete virtualized representation of the server's physical console, including the BIOS/UEFI setup screen. This is critical when configuring a new server because initial tasks like RAID configuration, boot order settings, and OS installation often occur before the operating system is installed or network services are active. Since the server is in another country, physical access via a crash cart is impossible, making IP KVM the only viable option for low-level hardware interaction.

Why the Other Options Are Wrong

A 'Crash cart' (B) requires physical presence at the server location, which contradicts the scenario of the administrator being elsewhere. A 'Remote console' (C) typically refers to software-based access to an already running OS (like SSH or RDP), which cannot be used to configure BIOS or install an OS on a bare-metal server without prior network connectivity. A 'Serial connection' (D) usually requires physical cabling (null-modem cable) directly to the serial port, which is not feasible across international borders without specialized hardware infrastructure.

Community Comment Notes

Comment [1] correctly identifies IP KVM as the standard for remote physical access. Comment [2] highlights the practical need for BIOS access for RAID and boot order, reinforcing why IP KVM is superior to OS-level tools. Comment [3] notes the common trap between RDP/remote console and IP KVM, emphasizing that IP KVM is the best answer for full hardware control.

Related Analysis

A server administrator is taking advantage of all the availa

A-Grade

A server located in an IDF of a paper mill reboots every oth

A-Grade

Which of the following attacks is the most difficult to miti

A-Grade

Practice All SK0-005 Questions

Access 135 questions with complete answers and detailed explanations.

View Full SK0-005 Practice Test →

← Back to SK0-005 Study Guide