Troubleshooting Random Characters in Print Output

220-1201 By islever Editorial Last updated

Short answer

A Download the correct printer driver to the laptop and configure it.

Question

A user’s laptop is constantly printing pages with random characters. The user makes multiple attempts to resend the print job but gets the same result. Which of the following should the technician do next to troubleshoot this issue?
  1. Download the correct printer driver to the laptop and configure it. Correct Answer
  2. Update the laptop’s anti-malware software and scan the system.
  3. Reimage the laptop with the last-known working configuration.
  4. Check the laptop for BIOS updates and install the latest version.

Key Takeaways

Random character output indicates a protocol or language mismatch between the OS and printer, usually resolved by correcting the driver rather than reimaging the OS or scanning for malware.

When a laptop prints pages with random characters, the issue typically stems from a printer driver mismatch. The correct solution is to download and configure the appropriate printer driver to ensure proper data communication.

Common mistake: Technicians may choose to reimage the laptop (C) because the issue seems severe, but this ignores the simpler fact that print jobs are formatted by drivers; a bad driver corrupts output without affecting core OS stability.

Expert Analysis

The symptom of a printer outputting random characters or gibberish is a classic indicator of a communication mismatch between the host system and the printer. This occurs when the data stream sent by the computer's operating system does not match the language or command set expected by the printer hardware, such as sending PostScript commands to a PCL-only device or vice versa.

While options like reimaging (C) or checking BIOS updates (D) address deep system integrity or firmware issues, they are excessive first steps for a peripheral connectivity problem. Similarly, while malware (B) can cause various system anomalies, it is rarely the primary cause of specific print driver formatting errors. The most direct and logical next step in the troubleshooting hierarchy is to verify the software interface managing the print queue.

As noted in community insights, "Pages of random characters... is a classic indication of a printer driver mismatch or corruption." Therefore, reinstalling or updating the correct driver ensures that the laptop sends the proper control codes to the printer, resolving the character encoding issue.

Exam Strategy

In hardware troubleshooting scenarios, always prioritize the component closest to the failure point before escalating to major system changes. If a peripheral produces corrupted output, suspect the driver or connection first. Avoid drastic measures like reimaging unless basic peripheral configurations have been ruled out.

Frequently Asked Questions

Why does my printer output random characters?

This usually happens when the printer driver sends data in a format (like PostScript) that the printer cannot interpret, causing it to display raw code as text.

Is this a sign of a virus?

Unlikely. While malware can cause issues, random print characters are almost exclusively caused by driver conflicts or incorrect port settings, not malicious software.

More 220-1201 FAQ →

Community Votes

A
100%

100% of anonymous learners picked answer A. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 1 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 1

  1. Afie 👍 1 Answered A
    Pages of random characters (gibberish) print continuously is a classic indication of a printer driver mismatch or corruption. Common causes: Wrong printer driver installed Corrupted printer driver Printer expecting PCL but receiving PostScript (or vice versa) Incorrect printer language configuration When this happens, the printer interprets the print job's control codes as printable text and produces pages of random symbols and characters.

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

Practice All 220-1201 Questions

Access 105 questions with complete answers and detailed explanations.

View Full 220-1201 Practice Test →

← Back to 220-1201 Study Guide