Troubleshooting MFP Scanning Artifacts
Short answer
C Clean the glass bed to remove debris affecting the scanner assembly while the print engine functions normally.
Question
Key Takeaways
The key trap is confusing print engine components (transfer rollers, maintenance kits) with scanner components; proper print output proves the print engine is healthy.
When an MFP produces clean prints but shows lines on copies, the issue lies with the scanner assembly. Cleaning the glass bed resolves artifacts caused by dust or debris on the optical surface.
Common mistake: Technicians often choose 'Apply a maintenance kit' because it sounds comprehensive, but this replaces print engine parts that are already verified as working.
Expert Analysis
Scanner vs. Print Engine Distinction The question specifies that print jobs are processing properly, which isolates the fault to the scanning or copying mechanism rather than the toner application or fusing process. Lines appearing on copies and scans originate from defects in the optical path, such as dust on the glass platen or ADF scan strip.
Eliminating Incorrect Options
- A (Replace transfer roller): The transfer roller moves toner onto the paper during printing. Since print jobs are fine, this component is functioning correctly.
- B (Remove pickup rollers): Pickup rollers feed paper into the device. Issues here would cause jams or blank pages, not image artifacts like lines.
- D (Apply maintenance kit): Maintenance kits typically replace wear items like fusers or drums. As these components affect the print engine's quality, they are not the primary solution for scanner-specific issues.
The Correct Action Cleaning the glass bed removes debris that casts shadows or lines onto the document during scanning. This aligns with standard troubleshooting doctrine for MFPs where hardware diagnostics show no print errors.
Exam Strategy
Always check for qualifiers that isolate subsystems. If a multifunction device performs one task perfectly (printing) but fails another (scanning), immediately rule out shared components like the paper path or toner. Focus your troubleshooting exclusively on the unique hardware of the failing function.
Frequently Asked Questions
What causes vertical lines on scanned documents?
How do I distinguish between a print and scan issue?
Community Votes
100% of anonymous learners picked answer C. Votes are pick records left by other test-takers — they are not the verified answer.
Discussion 1 contributions
Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.
From public community threads 1
-
Afie 👍 1 Answered CIf lines appear on copies and scanned documents, but the printer is processing print jobs properly, the issue is typically with the scanner assembly, not the print engine. A dirty scanner glass or Automatic Document Feeder (ADF) scan strip can cause: Vertical black lines White streaks Repeating lines on scans and copies Cleaning the glass bed and the narrow ADF scanning strip usually resolves the problem.
Reader comments & corrections
No reader corrections yet — spotted an error or have a note? Share it below.
Related Analysis
Practice All 220-1201 Questions
Access 105 questions with complete answers and detailed explanations.
View Full 220-1201 Practice Test →