Troubleshooting Isolated Wireless Connectivity Issues

220-1201 By islever Editorial Last updated

Short answer

C The laptop's wireless card is malfunctioning, causing isolated intermittent connectivity for a single user.

Question

A user reports that the Wi-Fi signal is intermittent in an open office area. Other users are not experiencing this issue. Which of the following is the most likely cause?
  1. There are other Wi-Fi signals that could be causing interference.
  2. All wireless devices are on the same frequency.
  3. The laptop's wireless card is malfunctioning. Correct Answer
  4. The antenna was installed near a device that generates electromagnetic interference.

Key Takeaways

The key trap is assuming network-wide problems like interference; the isolation of symptoms to a single device points directly to client-side hardware failure.

This CompTIA A+ 220-1201 question addresses troubleshooting isolated wireless connectivity problems. The correct answer is C, identifying a malfunctioning wireless card as the cause when only one user experiences intermittent signals.

Common mistake: Option A is often chosen because interference is common in open offices, but it fails to account for the fact that other users are unaffected, making it a systemic issue rather than a localized one.

Expert Analysis

Isolation of Symptoms The question states that the Wi-Fi signal is intermittent for one user in an open office, while "other users are not experiencing this issue." This critical detail isolates the fault to the specific endpoint device rather than the network infrastructure. If the problem were environmental interference (Option A), channel congestion (Option B), or a shared antenna placement issue (Option D), it would typically affect multiple devices in the same vicinity.

Ruling Out Environmental Factors Options A, B, and D all describe systemic or environmental factors that would impact multiple clients connected to the same access point. In a SOHO or office setting, interference from other signals or frequency crowding creates widespread performance degradation. Since only one laptop is affected, these broad causes are highly unlikely.

Endpoint Hardware Failure Option C identifies a malfunctioning wireless card as the cause. A failing Network Interface Card (NIC) can manifest exactly as described: intermittent connectivity, weak signal reception, or frequent drops on a single machine. The comments support this logic by noting that isolated issues point to the device itself. Therefore, troubleshooting should begin with the client hardware before investigating network-wide settings.

Exam Strategy

When troubleshooting network issues, always determine if the problem is isolated to a single device or affects multiple devices. If it is isolated, focus your troubleshooting steps on the client hardware (NIC, drivers, configuration) rather than the network infrastructure (APs, cabling, interference). This process of elimination saves time and prevents unnecessary changes to stable network components.

Frequently Asked Questions

How do I distinguish between interference and hardware failure?

Check if multiple devices in the same location experience the same issue. If only one device has problems, it is likely hardware or driver-related. If many devices struggle, look for environmental interference or AP configuration issues.

What are signs of a failing wireless NIC?

Common signs include frequent disconnects, inability to connect to certain networks, significantly weaker signal strength compared to other devices, and intermittent connectivity despite strong AP signal.

More 220-1201 FAQ →

Community Votes

C
100%

100% of anonymous learners picked answer C. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 2 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 2

  1. Afie 👍 1 Answered C
    "Other users are not experiencing this issue." This indicates the problem is isolated to one user's device, not the wireless network itself. A failing or malfunctioning wireless network card (NIC) can cause: Intermittent connections Weak signal reception Frequent disconnects Poor performance on a single device
  2. Macwell2 👍 1 Answered C
    C. The laptop's wireless card is malfunctioning

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

Practice All 220-1201 Questions

Access 105 questions with complete answers and detailed explanations.

View Full 220-1201 Practice Test →

← Back to 220-1201 Study Guide