Resolving SSL Certificate Errors After Power Outage

220-1201 By islever Editorial Last updated

Short answer

BC Set the system date and time in the BIOS and replace the CMOS battery to resolve the SSL certificate error caused by incorrect system clock settings after a power outage.

Question

Two workstations are connected to a LAN that does not have internet access. A user reports that they are unable to access a network service after a power outage. The web page warns the user that the site is insecure. Which of the following will most likely resolve the certificate error? (Choose two.)
  1. Renewing the SSL certificate
  2. Setting the system date and time in the BIOS Correct Answer
  3. Replacing the CMOS battery Correct Answer
  4. Adjusting the browser security settings
  5. Opening the HTTPS port on the workstation’s firewall
  6. Scanning the LAN for unauthorized devices

Key Takeaways

SSL/TLS validation relies heavily on accurate system time; a failed CMOS battery causes clock drift after power loss, leading browsers to reject otherwise valid certificates.

Learn how to fix SSL certificate errors on isolated LAN workstations after a power outage by resetting the system clock in BIOS and replacing the CMOS battery to restore accurate time synchronization.

Common mistake: Users might try renewing the SSL certificate (Option A), but that is a server-side action. The issue here is client-side time synchronization, so fixing the BIOS clock and the battery is required.

Expert Analysis

The scenario describes a workstation on an isolated LAN encountering SSL/TLS certificate errors after a power outage. Modern browsers validate certificates by checking their validity period against the system clock. If the date and time are incorrect, the browser may perceive a valid certificate as expired or not yet valid, triggering an 'insecure site' warning.

Power outages often reset hardware clocks if the motherboard's CMOS battery is failing or depleted. The BIOS stores the system time in volatile memory (CMOS RAM), which requires constant power from the coin-cell battery when the main power is off. Without this backup, the clock resets to a default factory date upon reboot, causing significant drift from the actual current time.

To resolve this issue, two actions are necessary:

  1. B. Setting the system date and time in the BIOS: This immediately corrects the clock discrepancy, allowing the browser to validate the certificate correctly.
  2. C. Replacing the CMOS battery: This prevents the problem from recurring. Since the clock reset happened due to the power loss, it indicates the battery is no longer holding the charge effectively. Replacing it ensures the BIOS retains the correct time settings across future power cycles.

Other options are incorrect because: Renewing the SSL certificate (A) addresses server-side issues, not client-side clock errors. Adjusting browser security settings (D) bypasses warnings but does not fix the underlying cause. Opening firewall ports (E) affects connectivity, not certificate validation. Scanning for unauthorized devices (F) is unrelated to time-sensitive cryptographic validation.

Exam Strategy

When troubleshooting certificate errors, always verify the client's system date and time before assuming server-side certificate issues. In scenarios involving power outages or hardware resets, suspect the CMOS battery as the root cause of clock drift. Prioritize correcting the immediate symptom (time setting) while addressing the persistent hardware fault (battery replacement).

Frequently Asked Questions

Why does a power outage affect SSL certificates?

Power outages can reset the system clock if the CMOS battery is weak. Browsers use the system time to validate certificate expiration dates; incorrect time leads to false security warnings.

Can I just ignore the browser warning?

No. Ignoring the warning compromises security. The error indicates a potential mismatch between the certificate's validity period and your system clock, which must be corrected to ensure secure communication.

More 220-1201 FAQ →

Community Votes

B
50%
C
50%

50% of anonymous learners picked answer B. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 1 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 1

  1. Afie 👍 1
    The LAN has no Internet access. After a power outage, the user gets a certificate warning that the site is insecure. SSL/TLS certificates depend on the device having the correct date and time. If the workstation's clock resets (often because of a failing CMOS battery), the browser may think the certificate is: Expired, or Not yet valid and will report the site as insecure. ✅ B. Setting the system date and time in the BIOS Correcting the system clock will often immediately resolve certificate validation errors. ✅ C. Replacing the CMOS battery A failing CMOS battery can cause the computer to lose its date/time settings whenever power is lost. Replacing it prevents the problem from recurring.

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

Practice All 220-1201 Questions

Access 105 questions with complete answers and detailed explanations.

View Full 220-1201 Practice Test →

← Back to 220-1201 Study Guide