Resolving Printer Ghosting Issues by Inspecting Transfer Roller
Short answer
C Inspect the transfer roller to resolve ghosting caused by residual toner on the drum or roller assembly.
Question
Key Takeaways
This question tests knowledge of laser printer maintenance, specifically distinguishing between ghosting (transfer/drum issues) and other defects like streaks (corona wire).
Learn how to fix faded images from previous jobs on printer output. The correct solution involves inspecting the transfer roller to address ghosting symptoms.
Common mistake: Many candidates choose D (Clean the corona wire) because they associate print quality issues with charging components. However, a dirty corona wire typically causes vertical lines or blank spaces, not ghosting of previous images.
Expert Analysis
The symptom described—faded images from previous jobs appearing on each page—is a classic definition of ghosting in laser printer technology. Ghosting occurs when residual toner remains on the photosensitive imaging drum or transfer roller after a page is printed, causing a faint duplicate of the prior image to appear on subsequent pages.
To resolve this, the technician must address the component responsible for transferring the toner image to the paper and ensuring the drum is cleaned for the next cycle. The transfer roller (or unit) applies the electrical charge necessary to pull toner from the drum onto the paper. If it fails to discharge properly or becomes contaminated with old toner, ghosting results. Inspecting and cleaning the transfer roller is the standard first step to restore proper charge and remove residual debris.
Other options are less appropriate:
- A. Reload the paper tray: This addresses paper jams or empty trays, not print quality issues like ghosting.
- B. Adjust the fuser temperature: The fuser melts toner onto the paper. Incorrect temperature causes smudging or poor adhesion, not residual images from previous jobs.
- D. Clean the corona wire: While a dirty corona wire can cause vertical streaks or blank areas due to improper charging of the drum, it does not typically cause the specific 'ghosting' effect of previous images reappearing. Ghosting is more directly linked to the transfer process or drum cleaning mechanism failure.
Therefore, inspecting the transfer roller is the correct initial diagnostic action.
Official Reference
https://www.comptia.org/certifications/a
This link opens the official vendor documentation in a new tab.
Exam Strategy
When troubleshooting printer output, map specific visual defects to their root causes. Ghosting (repeating images) points to the drum or transfer roller. Streaks point to the corona wire or developer. Smudging points to the fuser. Always start with the component most directly involved in the image transfer process before moving to secondary systems.
Frequently Asked Questions
What is printer ghosting?
Why not clean the corona wire for ghosting?
Community Votes
50% of anonymous learners picked answer C. Votes are pick records left by other test-takers — they are not the verified answer.
Discussion 4 contributions
Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.
From public community threads 4
-
CNature 👍 2 Answered CNo its C, Inspect transfer roller The correct answer is C (Inspect the transfer roller) because "faded images from previous jobs" is a classic symptom of a "ghosting" issue, which occurs when the drum or transfer roller fails to properly discharge or clean off old toner before starting the next print cycle. While cleaning the corona wire can help with streaks or blank pages by improving the charge applied to the paper, and adjusting the fuser temperature addresses toner not sticking (smearing), neither would specifically cause faint repetitions of previous pages. Reloading the paper tray is a basic maintenance step that would have no effect on the electrical or chemical process of toner transfer that causes ghosting.
-
Afie 👍 1 Answered D"Faded images from previous jobs appear on each page" This is known as ghosting. In laser printers, ghosting often occurs when residual toner is not properly cleared from the imaging process. A dirty corona wire can prevent the drum from being properly charged and discharged, causing remnants of previous images to appear on subsequent pages
-
rupav2 👍 1 Answered CAnswer C: Inspect the transfer roller . Imaging components directly addresses the electrical charge failure causing old images to reappear.
-
Gabrycloud 👍 1 Answered BI'm arriving at B by process of elimination.
Reader comments & corrections
No reader corrections yet — spotted an error or have a note? Share it below.
Related Analysis
Practice All 220-1201 Questions
Access 105 questions with complete answers and detailed explanations.
View Full 220-1201 Practice Test →