RAID 1 Mirroring Gives Two SSDs a Full Data Copy

220-1201 By islever Editorial Last updated

Short answer

B Mirror both SSDs as RAID 1 so each drive stores an identical copy of the data and one drive failure causes no data loss.

Question

A user has two SSDs of the same size in their PC. The user wants to configure both SSDs to have a copy of all data so there will be no data loss if one drive fails. Which of the following is this an example of?
  1. RAID 0
  2. RAID 1 Correct Answer
  3. RAID 5
  4. RAID 10

Key Takeaways

The test checks whether you map "full copy, survive one failure" to mirroring, while recognizing that RAID 10 needs four drives and RAID 5 needs three.

This A+ question asks which RAID level gives two identical SSDs a complete duplicate of all data. The answer is B: RAID 1, or mirroring.

Common mistake: A (RAID 0) is the most tempting wrong choice because striping across two identical SSDs is the classic two-drive setup, but it provides no redundancy, so a single failure loses everything.

Expert Analysis

Why RAID 1 fits the requirement The scenario asks for two SSDs of the same size where each holds a complete duplicate, so a single drive failure causes no data loss. That is the textbook definition of mirroring: the array writes every block to both disks at once, and either SSD can serve the whole volume. With exactly two drives, the only level that behaves this way is RAID 1, so B is the correct answer.

The attractive trap: RAID 10 RAID 10 looks right because it is literally "RAID 1 plus RAID 0" — mirroring combined with striping — and mirroring does produce full copies. The single point where it stops being correct is the drive count: RAID 10 needs a minimum of four drives, arranged as two mirrored pairs that are then striped together. Two SSDs cannot form RAID 10, and the question fixes the hardware at two drives, so an option that cannot be built with the stated hardware is wrong no matter how much redundancy it promises.

Why RAID 0 fails the goal RAID 0 is the reflexive "two identical drives" answer and the most common wrong pick, because striping splits data across both SSDs and seems to make use of the pair. But it delivers zero fault tolerance: if either SSD fails, the stripe is broken and everything is lost. It contradicts the wording "a copy of all data" directly.

Why RAID 5 fails RAID 5 stripes data with distributed parity and tolerates one failure, but it requires at least three drives, so with two SSDs it is not an option at all.

Official Reference

https://www.comptia.org/certifications/a

This link opens the official vendor documentation in a new tab.

Exam Strategy

Translate the scenario wording into a RAID level before looking at the options: "copy of everything" plus "one drive fails" means mirroring, so think RAID 1 for two drives, RAID 5 for three or more, RAID 10 for four or more. Then check each remaining option against the drive count actually given — in this case two SSDs — and discard any level whose minimum drive requirement exceeds the hardware. This two-step filter (redundancy requirement, then minimum drives) quickly eliminates RAID 0, RAID 5, and RAID 10 here.

Frequently Asked Questions

Why can't two SSDs be configured as RAID 10?

RAID 10 requires at least four drives: two mirrored pairs that are then striped together. With only two SSDs there is no second pair to stripe, so the array cannot be created; RAID 1 is the two-drive mirroring option.

Does RAID 1 reduce usable storage capacity?

Yes. With two equal SSDs, mirroring halves usable space: a 1 TB RAID 1 array exposes 1 TB while both drives store identical copies of that data.

What does RAID 0 offer if it has no fault tolerance?

RAID 0 stripes data across both SSDs, which can improve sequential performance and lets you use the full combined capacity as one volume, but either drive failing destroys the entire array.

More 220-1201 FAQ →

Community Votes

B
100%

100% of anonymous learners picked answer B. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 1 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 1

  1. Afie 👍 1 Answered B
    RAID 1 (Mirroring) writes identical data to two drives. If one SSD fails, the other SSD contains a complete copy of the data, preventing data loss and allowing the system to continue operating. Why not the others? A. RAID 0: Striping only. Improves performance but provides no fault tolerance. If one drive fails, all data is lost. C. RAID 5: Uses striping with parity and requires at least 3 drives. D. RAID 10: Combines mirroring and striping but requires at least 4 drives. Exam Tip: RAID 0 = Performance RAID 1 = Redundancy (Mirror) RAID 5 = Parity + 3+ drives RAID 10 = Speed + Redundancy (4+ drives)

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

Practice All 220-1201 Questions

Access 105 questions with complete answers and detailed explanations.

View Full 220-1201 Practice Test →

← Back to 220-1201 Study Guide