Modular Power Supplies for Home Desktop Cable Management

220-1201 By islever Editorial Last updated

Short answer

B Choose a modular power supply so the technician connects only the cables the home desktop needs, keeping unused leads out of the case for cleaner cable management.

Question

A technician is building a home desktop computer. The technician wants to prioritize cable management when considering the type of power supply. Which of the following power supply types should the technician consider?
  1. Back-up
  2. Modular Correct Answer
  3. Standard
  4. Redundant

Key Takeaways

This tests your knowledge of power supply form factors; the trap is confusing availability features (redundant/back-up) or the fixed-cable standard unit with the detachable-cable design that solves cable clutter.

When cable management is the priority for a home desktop build, a modular power supply is the right choice because only the required cables are attached. Standard, back-up and redundant units do not improve cable routing.

Common mistake: Option C (Standard) — a standard PSU works fine in a home build, but its permanently attached cables force you to hide unused leads, which directly conflicts with the stated cable-management priority.

Expert Analysis

The core distinction: modular vs standard A modular power supply lets the technician attach only the cables the build actually needs — the 24-pin ATX, the 8-pin CPU, and whichever PCIe leads the graphics card requires. Everything else stays in the box. A standard (fixed-cable) power supply has every cable permanently soldered to the unit, so unused SATA, Molex and PCIe leads must be zip-tied and stuffed somewhere in the case. That is exactly the cable-management trade-off this question asks about, so option B (Modular) is correct.

Why the other options do not answer the question Option A (Back-up) and option D (Redundant) describe availability architectures: a redundant PSU carries a second unit that takes over on failure, typically in servers. Neither changes how cables are routed, and both add cost and bulk that are pointless for a home desktop. Option C (Standard) is the fixed-cable baseline — it works, but it is the worst choice when cable management is the stated priority, which is precisely the trap.

The adjacent decision: cost versus airflow The real-world follow-up is choosing between modular, semi-modular and fully modular. Semi-modular units permanently fix the essential 24-pin and 8-pin cables while making the peripheral leads detachable, and they are usually cheaper — for a simple home build without a windowed case, semi-modular often satisfies the same cable-management goal. The scenario would flip away from a purely modular answer only if the brief mentioned strict budget limits or a non-modular unit already purchased.

Operational consequence of getting it wrong Choosing a standard PSU in a small case with poor cable routing blocks airflow over the GPU and drives, raising temperatures and noise, and makes later upgrades — adding a drive or swapping the graphics card — a tangle of tied-down leads. Exam-wise, when a question names a physical build goal such as cable management, airflow or clean routing, the intended answer is almost always the modular PSU form factor.

Exam Strategy

In hardware scenario questions, match the option to the stated goal rather than to what simply works — here the goal is cable management, so scan for the detachable-cable design and ignore availability features like redundant or back-up. If both modular and semi-modular appear, pick fully modular unless the scenario adds a budget constraint. Treat words like 'prioritize', 'best' or 'most' as signals that a trade-off, not mere functionality, is being tested.

Frequently Asked Questions

What is the difference between a modular and a standard power supply?

A modular PSU has detachable cables, so you plug in only what the build needs; a standard PSU has all cables permanently attached. For cable management and airflow, modular wins, while standard units are cheaper but leave unused leads to tuck away.

Would a redundant or back-up PSU ever be right for a home desktop?

No. Redundant and back-up power supplies exist for servers and high-availability systems where a second unit takes over on failure. They add cost and bulk without improving cable management in a home build.

Is a semi-modular PSU a valid answer when cable management matters?

Yes, semi-modular units let you detach peripheral and PCIe cables while keeping the essential 24-pin and 8-pin fixed, offering most of the cable-management benefit at a lower price. It is not offered here, so modular (B) is the correct choice.

More 220-1201 FAQ →

Community Votes

B
100%

100% of anonymous learners picked answer B. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 1 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 1

  1. Afie 👍 1 Answered B
    A modular power supply allows the technician to connect only the cables that are needed. Benefits: ✅ Better cable management ✅ Improved airflow inside the case ✅ Easier installation and maintenance ✅ Cleaner-looking build Unused cables can be left disconnected, reducing clutter compared to a standard power supply.

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

Practice All 220-1201 Questions

Access 105 questions with complete answers and detailed explanations.

View Full 220-1201 Practice Test →

← Back to 220-1201 Study Guide