Identifying Devices for NVMe Ports
Short answer
B A solid-state drive is installed in an NVMe port, as NVMe is a protocol optimized for SSDs using PCIe interfaces.
Question
Key Takeaways
The main trap is confusing general storage types with specific interface protocols; NVMe is exclusively associated with high-performance SSDs, not traditional hard drives or optical media.
This page explains why a solid-state drive is the correct choice for an NVMe port, contrasting it with SATA and SAS options for CompTIA A+ exam preparation.
Common mistake: Candidates often select 'SATA drive' because it is a common storage type, but SATA drives use the AHCI protocol over SATA interfaces, whereas NVMe is a distinct protocol for PCIe-connected SSDs.
Expert Analysis
The question asks for the device most likely installed in an NVMe port on a motherboard. NVMe (Non-Volatile Memory Express) is a high-speed interface protocol designed specifically to leverage the low latency and high parallelism of modern Solid-state drives (SSDs) connected via PCIe lanes or M.2 slots.
Option B (Solid-state drive) is the correct answer because NVMe is essentially the communication layer that allows SSDs to achieve speeds significantly faster than traditional SATA-based storage. While other options like SAS or SATA exist, they use different protocols (SAS uses SCSI commands over SATA/SAS interfaces; SATA uses AHCI). Optical drives are unrelated to internal storage expansion ports.
This knowledge extends to understanding the evolution of storage interfaces: from mechanical HDDs to SATA SSDs, and now to NVMe SSDs which bypass the legacy SATA bottleneck. If the scenario involved a slower connection or older hardware, one might incorrectly choose SATA, but the explicit mention of 'NVMe' dictates the use of an NVMe-compatible SSD. Getting this wrong could lead to purchasing incompatible hardware, as standard SATA SSDs cannot utilize the full potential of an NVMe slot without specific controller support.
Official Reference
https://www.comptia.org/certifications/a
This link opens the official vendor documentation in a new tab.
Exam Strategy
When identifying hardware components by their interface or port, focus on the specific technology acronym provided (e.g., NVMe, USB-C, HDMI). Memorize the primary association for each acronym rather than just the general category. For example, link 'NVMe' directly to 'PCIe SSD' and 'AHCI' to 'SATA'. This prevents errors when distractors include similar but technically distinct devices.
Frequently Asked Questions
Can I install a SATA SSD in an NVMe slot?
What is the difference between NVMe and SATA?
Community Votes
100% of anonymous learners picked answer B. Votes are pick records left by other test-takers — they are not the verified answer.
Discussion 1 contributions
Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.
From public community threads 1
-
Afie 👍 1 Answered BNVMe (Non-Volatile Memory Express) is a storage protocol designed specifically for SSDs that connect through a motherboard's M.2 NVMe slot or PCIe interface. Typical NVMe drives: M.2 SSDs PCIe SSDs
Reader comments & corrections
No reader corrections yet — spotted an error or have a note? Share it below.
Related Analysis
Practice All 220-1201 Questions
Access 105 questions with complete answers and detailed explanations.
View Full 220-1201 Practice Test →