Identifying 5GHz Wireless Technology: 802.11ac vs Other Standards
Short answer
B 802.11ac is the wireless networking technology that primarily operates in the 5GHz frequency band, distinguishing it from Bluetooth, NFC, and RFID which use lower frequencies.
Question
Key Takeaways
The main trap is confusing 802.11ac with other Wi-Fi standards like 802.11n, which supports both 2.4 GHz and 5 GHz. Remember that 802.11ac is 'Wi-Fi 5' and is 5 GHz only.
This question tests knowledge of wireless networking frequency bands. The correct answer is B because 802.11ac exclusively uses the 5GHz band, unlike Bluetooth, NFC, and RFID which operate on lower frequencies.
Common mistake: Candidates might incorrectly choose A (Bluetooth) if they confuse general wireless proximity technologies with Wi-Fi standards. However, Bluetooth firmly resides in the 2.4 GHz band, not 5 GHz.
Expert Analysis
Frequency Band Analysis
The question asks to identify which wireless technology primarily operates in the 5 GHz frequency band. To determine the correct answer, we must evaluate the standard operating frequencies of each option provided.
802.11ac (Wi-Fi 5) is a Wi-Fi standard that was specifically designed to operate exclusively in the 5 GHz band. This standard introduced wider channel widths (up to 160 MHz) and more spatial streams to achieve higher data rates. Because it does not support the 2.4 GHz band, it is the only option here that fits the "primarily 5 GHz" criteria strictly. As noted in community feedback, this standard offers less interference than older 2.4 GHz standards like 802.11n, making it ideal for high-bandwidth activities like streaming and gaming.
Bluetooth typically operates in the 2.4 GHz ISM band. While Bluetooth Low Energy (BLE) also uses this band, there are no common variants of Bluetooth that primarily use 5 GHz for short-range communication.
NFC (Near Field Communication) operates at a much lower frequency of 13.56 MHz. It is used for very short-range contactless transactions and data exchange, far from the 5 GHz spectrum.
RFID (Radio Frequency Identification) generally operates in low-frequency bands such as 125 kHz, 13.56 MHz, or sometimes UHF around 900 MHz. It does not utilize the 5 GHz microwave range.
Therefore, among the choices, only 802.11ac is defined by its operation in the 5 GHz band.
Official Reference
https://en.wikipedia.org/wiki/IEEE_802.11ac
This link opens the official vendor documentation in a new tab.
Exam Strategy
When faced with questions about wireless frequencies, memorize the primary bands for key technologies: 2.4 GHz for Bluetooth, legacy Wi-Fi (802.11b/g/n), and Zigbee; 5 GHz for modern Wi-Fi (802.11ac/ax); and 13.56 MHz for NFC and RFID. Eliminate options based on these fixed frequency allocations to quickly narrow down the correct choice.
Frequently Asked Questions
Does 802.11ac support 2.4 GHz?
What frequency does Bluetooth use?
Community Votes
100% of anonymous learners picked answer B. Votes are pick records left by other test-takers — they are not the verified answer.
Discussion 1 contributions
Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.
From public community threads 1
-
Afie 👍 1 Answered B802.11ac (Wi‑Fi 5) primarily operates in the 5 GHz frequency band. Benefits of 802.11ac: ✅ Higher speeds than 802.11n ✅ Less interference than 2.4 GHz ✅ Supports wider channels (80 MHz and 160 MHz) ✅ Better performance for streaming and gaming
Reader comments & corrections
No reader corrections yet — spotted an error or have a note? Share it below.
Related Analysis
Practice All 220-1201 Questions
Access 105 questions with complete answers and detailed explanations.
View Full 220-1201 Practice Test →