Full HD Standard: Which Resolution Does It Use?

220-1201 By islever Editorial Last updated

Short answer

B Full HD uses 1920x1080, while 1280x720 is HD, 3840x2160 is 4K UHD, and 7680x4320 is 8K UHD.

Question

Which of the following resolutions does the Full HD standard use?
  1. 1280x720
  2. 1920x1080 Correct Answer
  3. 3840x2160
  4. 7680x4320

Key Takeaways

It tests whether you can map marketing resolution names to exact pixel dimensions, with the trap of confusing Full HD 1920x1080 with 4K UHD or 8K UHD.

Full HD is the display resolution standard 1920x1080. This page confirms option B and separates HD, 4K UHD, and 8K UHD naming for the 220-1201 exam.

Common mistake: Choosing C (3840x2160) because “Full HD” sounds like the highest HD tier; that resolution is 4K UHD, not Full HD, whose exact pixel count is 1920x1080.

Expert Analysis

Resolution names are not interchangeable. Full HD is a display-standard term tied to 1920 × 1080 pixels, which is option B. The surrounding ladder matters more than the single fact: HD is 1280 × 720 (A), 4K UHD is 3840 × 2160 (C), and 8K UHD is 7680 × 4320 (D). A community note lists exactly that ladder—720p, 1080p, 4K UHD, 8K UHD—which matches common display terminology and serves as a consistency check rather than a popularity vote. Even without a reliable suggested key, the definition alone makes B the only viable choice.

Adjacent decisions this knowledge supports. In the display domain, resolution naming feeds several practical choices: selecting a monitor's native mode, matching a projector input to content, configuring remote-session or video-output settings, and judging whether a cable or port can carry the required bandwidth at the desired refresh rate. A 1920 × 1080 panel can accept a 4K signal on some systems and scale it, but that is not the same as displaying 4K natively. Likewise, a 1280 × 720 projector is not “Full HD” merely because it accepts a 1080p input. The naming question is therefore a gateway to native-resolution and scaling decisions.

What changes the answer. If the scenario asked for 4K UHD, the correct letter would be C; for 8K UHD, D; for plain HD/720p, A. If the wording changed from “Full HD standard” to “a monitor's native resolution is 1920 × 1080 and a 3840 × 2160 signal is sent,” the issue shifts from naming to downscaling and bandwidth. If a user reports blurry text after setting a 1920 × 1080 display to 3840 × 2160, the fix is to restore native resolution, not to rename the standard.

Operational consequence. Mislabeling tiers causes real support errors: ordering or provisioning the wrong panel, assuming a dock supports 4K when it is limited to 1080p, or blaming a cable for blur that comes from non-native scaling. It can also produce misleading asset records—recording Full HD monitors as 4K—and bad expectations for text clarity, refresh rate, and video playback. Treat resolution as a specification with exact pixel counts, then verify the endpoint's native mode and the link's capabilities.

Exam takeaway. For 220-1201, memorize the tier-to-pixel map and read the qualifier—HD, Full HD, 4K UHD, 8K UHD—before choosing. Option B is the only Full HD entry.

Exam Strategy

When a question names a display tier, immediately convert the marketing term into pixels before reading the options: HD/720p, Full HD/1080p, 4K UHD/2160p, and 8K UHD/4320p. Eliminate answers whose dimensions belong to a different tier, then check whether the stem asks for native resolution, supported input, or cable bandwidth—those can change the operational answer even when the name stays the same. Write the pixel ladder on scratch paper at the start of the exam.

Frequently Asked Questions

Is Full HD the same as 1080p?

Yes. Full HD is 1920x1080 progressive resolution, commonly called 1080p; 1280x720 is HD or 720p.

What resolution is 4K UHD compared with Full HD?

4K UHD is 3840x2160, four times the pixel count of Full HD's 1920x1080. 8K UHD is 7680x4320.

Why does Full HD matter when troubleshooting a display?

It defines a common native panel mode and expected scaling. Setting a 1920x1080 display to a higher signal can cause blur, and port or cable limits may cap refresh rate.

More 220-1201 FAQ →

Community Votes

B
82%
C
18%

82% of anonymous learners picked answer B. Votes are pick records left by other test-takers — they are not the verified answer.

Discussion 1 contributions

Compiled from public community threads and reader submissions, lightly edited for clarity. Handles and vote tallies are shown as recorded, and comments reflect the views of individual contributors.

From public community threads 1

  1. Afie 👍 1 Answered B
    Resolution Standards HD (720p) 1280 × 720 Full HD (1080p) 1920 × 1080 ✅ 4K UHD 3840 × 2160 8K UHD 7680 × 4320

Reader comments & corrections

No reader corrections yet — spotted an error or have a note? Share it below.

Log in to comment, report an error, or add a note about this question.

Practice All 220-1201 Questions

Access 105 questions with complete answers and detailed explanations.

View Full 220-1201 Practice Test →

← Back to 220-1201 Study Guide