2V0-18.25 VMware vSphere Foundation 9.0 Support exam badge

VMware

VMware vSphere Foundation 9.0 Support (2V0-18.25) practice questions

★★★★★★ 4.8 61 reviews — aggregated from community votes by visitors who practiced this bank

Questions
87
Exam length
135 min
Passing score
300
  • Instant feedback per question
  • Explanation for every option
  • Free, no signup

Exam overview 2V0-18.25

Every scored item on 2V0-18.25, the VMware vSphere Foundation 9.0 Support exam, asks you to diagnose something. Broadcom builds the paper from a single troubleshooting section — Troubleshoot and Optimize the VMware by Broadcom Solution — so there is no design essay hiding inside it, just sixty incidents across 135 minutes, with the pass mark set at 300 on a 100-500 scale, booked through Pearson VUE at USD 250 and delivered in English or Japanese. Passing earns the VMware Certified Professional – VMware vSphere Foundation Support credential, VCP-VVF Support for short.

The candidate the guide describes has spent about two years in IT and one of those years supporting VVF components, either standalone or inside a deployment. That second year is the part that matters. These are service desk analysts taking the first escalation, platform engineers who own the rebuild, and SREs paged at 02:00 when a cluster stops answering. They already know what a vSAN datastore is; the paper asks whether they can separate a partition from a capacity problem before touching anything.

Five components carry the questions: VCF Operations, vCenter, VMware ESX, vSAN and VCF Operations for Logs. Notice what is missing. vSphere Foundation does not include the full NSX stack, so nothing here asks you to trace a transport node or design a Tier-0 gateway — the diagnostic work sits in compute, storage and the operations layer instead. Within those five, the paper rewards one repeatable habit: establish the boundary, collect the evidence, then change state.

Incident-first practice is the point: a host whose management IP still answers while the DCUI sits frozen, a vSAN object parked inside its 60-minute repair delay, a syslog listener on 6514 that never receives a byte, an Extracted Fields rule that refuses to promote an error code out of a free-text line. Each online practice question ships with a detailed answer explanation, and a timed run shows which diagnostic reflex — evidence first, or action first — is still missing.

Free questions are the cheapest way to learn whether you read a delay timer as a capacity shortfall.

Sample questions 9 of 87 shown

  1. Q1
    You are asked to create a report in VCF Operations that details the capacity utilization of all VVF workload clusters. Which component do you need to configure first before generating the report?
    1. A custom Dashboard
    2. A View
    3. A Super Metric
    4. An Alert
    In VCF Operations, reports are built on top of views. You must first create or select a view (for example a list or trend view over capacity metrics), then include that view in the report template so the report engine can render it to PDF or CSV. Dashboards are for interactive widgets, super metrics are computed metrics, and alerts are threshold-driven — none of them is the data source a report template consumes.
  2. Q2
    You are investigating high CPU utilization on the VCF Operations appliance. Which of the following is a recommended approach to alleviate performance issues on a standalone VCF Operations node?
    1. Enable Storage DRS on the datastore where the appliance resides.
    2. Scale up the appliance by adding more vCPU and RAM, up to the supported maximums for the node size.
    3. Disable data collection for all vCenter Servers.
    4. Change the operating system of the appliance to Windows Server.
    When a standalone VCF Operations node is undersized for the volume of data it ingests, the supported remedy is to vertically scale the node within the documented sizing limits, or to scale out by adding nodes to the cluster. Turning off collection destroys the evidence you are troubleshooting with, Storage DRS does not address appliance CPU pressure, and the appliance is a fixed virtual appliance — there is no supported operating system substitution.
  3. Q3
    You are troubleshooting a failed upgrade of the SDDC Manager appliance in VVF 9.0. Which log directory on the SDDC Manager appliance contains the specific logs for the LCM (Lifecycle Management) services?
    1. /var/log/vmware/vcf/lcm/
    2. /var/log/messages
    3. /var/log/vmware/sddc-manager/
    4. /var/log/vmware/vpxd/
    LCM activity on SDDC Manager writes to /var/log/vmware/vcf/lcm/, where lcm.log and lcm-debug.log record the orchestration of upgrades, patches and other lifecycle operations. /var/log/messages holds general system messages, the vpxd path belongs to vCenter, and the sddc-manager directory holds the service's own application logs rather than the LCM workflow detail.
  4. Q4
    A VVF administrator is unable to access an NFS datastore from a newly added ESXi host. The datastore is accessible from all other hosts in the cluster. Which of the following is the most likely cause?
    1. The NFS server has run out of storage capacity.
    2. The VMkernel port used for NFS traffic on the new host has an incorrect IP address or routing configuration.
    3. The VVF license does not support NFS storage.
    4. The new host requires a reboot to apply the NFS VIB.
    When exactly one host cannot reach an NFS export while every other host can, the fault is host-local, and the host-local dependency for NFS is the VMkernel interface carrying that traffic. An incorrect VMkernel IP, wrong VLAN tagging, a missing route, or a firewall rule that blocks the NFS client on that host will produce precisely this asymmetry. Array capacity would affect all hosts, NFS is not license-gated, and the NFS client is built into ESXi rather than supplied by a VIB that needs a reboot.
  5. Q5
    An administrator is trying to add a new cluster to an existing VVF workload domain. The operation fails because the selected ESXi hosts are not visible in the SDDC Manager inventory. What must be done first?
    1. The hosts must be added to a vCenter Server manually.
    2. The hosts must be commissioned into the VCF inventory via SDDC Manager.
    3. The hosts must have virtual machines deployed on them.
    4. The hosts must be placed in Maintenance Mode.
    Before hosts can be consumed to create or scale a cluster, they must be commissioned into the VCF inventory. Commissioning validates host configuration against the network pool, checks the hardware and software baseline, and then makes the hosts selectable in the free-host inventory. Adding hosts directly to vCenter bypasses that validation, and neither workload placement nor maintenance mode is a prerequisite for commissioning.
  6. Q6
    A network administrator configured a new VLAN on the physical Top of Rack (ToR) switches. However, VMs attached to a VDS port group using this VLAN in VVF cannot communicate on the network. What is the most likely cause?
    1. The VLAN ID was not configured on the VDS port group.
    2. The VMs are using E1000 network adapters instead of VMXNET3.
    3. vSphere HA isolated the VMs.
    4. The VCF Cloud Builder appliance blocked the traffic.
    For tagged traffic to reach the physical network, the ToR uplinks must trunk the VLAN and the distributed port group must be configured with the matching VLAN ID. If the port group is left at VLAN 0 (or a different ID), frames egress untagged or on the wrong segment and are dropped upstream. Adapter type affects performance, not VLAN membership; HA isolation would restart VMs rather than selectively break one VLAN; and the deployment appliance is not in the data path.
  7. Q7
    You are troubleshooting a vSphere Standard Switch (VSS) configuration on a legacy VVF host prior to conversion. A VM cannot receive traffic, but can send it. You suspect a security policy issue. Which VSS security policy, if set to "Reject", could cause issues with certain clustering software that masks MAC addresses?
    1. Promiscuous Mode
    2. MAC Address Changes
    3. Forged Transmits
    4. Traffic Shaping
    With MAC Address Changes set to Reject, the host drops inbound frames destined to a VM whose guest operating system has changed its effective MAC address away from the address defined in the .vmx file. Clustering and load-balancing software that presents a virtual or masked MAC (for example Microsoft NLB) is broken by exactly this setting: outbound traffic still flows, but return traffic is discarded, which matches the "can send, cannot receive" symptom. Forged Transmits governs outbound frames with a different source MAC, promiscuous mode governs delivery of frames not addressed to the vNIC, and traffic shaping is a bandwidth control.
  8. Q8
    You are using VCF Operations for logs to troubleshoot a recurring authentication failure across your VVF environment. You want to be notified immediately if this error occurs more than 10 times in 5 minutes. How can you achieve this? (Choose two.)
    1. Create a query for the specific authentication error.
    2. Export the logs to a CSV file every 5 minutes.
    3. Create an Alert from the query based on the frequency threshold.
    4. Configure a Content Pack to block the user.
    VCF Operations for logs (the Log Insight engine) turns a saved query into an alert: you first build a query that isolates the authentication failure, then create an alert on that query with a frequency condition (more than 10 events in 5 minutes) and attach a notification or webhook. CSV export is a manual reporting action with no evaluation, and content packs supply dashboards, queries and alerts — they do not block users, which is an identity-provider function.
  9. Q9
    In VCF Operations, an administrator wants to view all currently active alerts that are critically impacting the health of a specific VVF workload cluster. Which dashboard or view is best suited for this?
    1. The Environment -> Workload Cluster -> Alerts tab
    2. The Administration -> Access Control page
    3. The Dashboards -> Costing Analysis view
    4. The Reports -> Generate Report menu
    Navigating the Environment tree to the workload cluster object and opening its Alerts tab filters the alert list to that object and its descendants, which is the fastest way to see what is currently critical for that cluster only. Access Control is authorization, Costing Analysis is chargeback, and the Reports menu produces scheduled output rather than a live filtered alert view.

Answer all 87 questions with instant feedback →

Reader reviews 61 ratings

4.8 ★★★★★★ Based on 61 ratings
  • I was struggling with 2V0-18.25 until I found this. The domain-based organization and instant feedback helped me identify weak areas quickly.

    ★★★★★★ David L.

  • I passed 2V0-18.25 on my first try thanks to these practice questions. The unlimited retakes were essential for building confidence.

    ★★★★★ Nicole K.

  • Bought the 2V0-18.25 pack last month and honestly the detailed explanations are where this really shines.

    ★★★★★★ Ethan C.

  • The 2V0-18.25 certification opened up a promotion for me at work. These practice questions were a big part of that success.

    ★★★★★★ Ryan J.

  • Recommended this to my entire study group for 2V0-18.25. Four out of four passed. That says something.

    ★★★★★★ Audrey K.

  • The domain-based breakdown in the 2V0-18.25 questions really helped me identify which areas needed more work.

    ★★★★★★ Elena R.

Log in to rate this exam and leave a review.

Frequently asked questions

How hard is the 2V0-18.25 exam?

Demanding, but narrower than it looks. Every item sits inside one troubleshooting section, so you are never asked to design a workload domain — only to diagnose one. Engineers who have repaired vSAN, vCenter and log pipelines under pressure find it fair; those who have only deployed VVF usually need lab time.

Do the 2V0-18.25 practice questions rehearse log collection the way the exam does?

Yes — bundle collection is treated as a first move, not an afterthought. Items put you in front of a Broadcom service request and ask which tool pushes ESXi and vCenter logs without a manual handoff, and the explanation names Log Assist, its upload path and what a partial bundle leaves out.

Does 2V0-18.25 test NSX?

No. The five components Broadcom names are VCF Operations, vCenter, VMware ESX, vSAN and VCF Operations for Logs, and none of them is the NSX overlay. If you want transport nodes, Tier-0 gateways and VPC connectivity scored, that is 2V0-15.25, the Cloud Foundation support paper.

Should you take 2V0-18.25 or 2V0-15.25?

Take 2V0-18.25 when the estate you support is vSphere Foundation, and 2V0-15.25 when it is full Cloud Foundation. VVF stops at vSphere, vSAN and the operations stack with no NSX fabric; VCF adds workload domains, NSX and automation organizations. Neither paper is a prerequisite for the other.

Is a mock exam useful for the vSAN rebuild and HA questions?

It is, because those items reward pattern recognition over recall. A timed mock exam shows whether you read "Reduced Availability with no rebuild" as a clom.repairDelay window rather than a capacity shortfall, and whether you open fdm.log before restarting anything when a host stops answering.

What happens if you fail — how long before a retake?

Wait seven calendar days, then pay the USD 250 fee again; Broadcom publishes no discounted retake. Use the gap on the objective that produced your weakest answers rather than on another full run, since the second paper draws a different mix of scenarios.

Which languages and question types will you see on test day?

English and Japanese, delivered through Pearson VUE in 60 questions over 135 minutes. Expect multiple choice and multiple choice multiple selection, with some items asking you to pick two or three options. Nothing is hands-on: no lab console appears, only scenario text and answer choices.