Design radio management
7 practice questions under this official exam objective (300-425, 300-110), each with the answer key, an option-by-option explanation and instant feedback.
Questions under this objective
7 total · page 1 of 1How to Scan Rogue APs on 2.4 and 5 GHz with Cisco 2800I?
Cisco 2800I APs use a dedicated 5 GHz slot 1 radio and a flexible XOR radio to scan for rogue APs in both 2.4 GHz and 5 GHz without disrupting 5 GHz c
Which UNII-2 Channels Must Be Designed for IW3700 WGBs?
A warehouse using IW3700 Series APs in workgroup bridge mode must confine the mobile machine area to UNII-2 channels while shortening the WGB channel
How to Configure 802.11v BSS Transition for Optimized Roaming?
This question tests how to configure a Cisco WLAN to use 802.11v BSS Transition and optimized roaming to steer clients to the best AP. The correct set
Why Legacy 802.11b/g Devices Lose Connectivity with RRM TPC
This scenario explains why legacy 802.11b/g devices lose connectivity in a hospital Wi-Fi design using RRM for TPC. It establishes that TPC reducing T
Channel Bonding and Mandatory 24 Mbps Data Rates for High Density?
In a high-density school deployment, bonding channels in pairs requires a 40 MHz channel on the 802.11a (5 GHz) PHY, and forcing AP management frames
How to Mitigate 2.4 GHz Co-Channel Interference in High-Density WLAN?
This high-density Cisco wireless design question asks how to mitigate 2.4 GHz co-channel interference when nine APs are needed for 5 GHz coverage in o
Configuring Power Threshold for High-Density RF Cell Sizing
Learn how to use the power threshold setting in Cisco WLC to create smaller RF cells in high-density designs, ensuring clients connect to the nearest