Test 300-810

Question 1:
A collaboration engineer is troubleshooting MWI issues with Cisco Unity Connection and Cisco UCM. Users report that MWI lights do not work when a new message is received. After doing a packet capture, the engineer notices that Unity Connection sends a SIP Notify to Cisco UCM for MWI. Cisco UCM responds with a SIP 503 Service Unavailable message. Which action resolves the issue?

A.
Configure the SIP server list on the Cisco Unity Connection port group to match the Cisco UCM device pool settings on the SIP trunk.
B.
Assign the proper voicemail profile to the directory numbers on Cisco UCM.
C.
Uncheck “Send Message Counts” on the phone system settings on Cisco Unity Connection.
D.
Uncheck “Accept unsolicited notifications” on the SIP trunk security profile.
Question 2:
Which entity within the SAML Circle of Trust is responsible for providing the assertion to the client?

A.
identity provider
B.
service provider
C.
Cisco UCM
D.
LDAP
Question 3:
An engineer is informed that high availability for a Cisco IM and Presence server fails. While the engineer examines the Cisco UCM presence redundancy group in the UI, they discover that the first node is in the Idle state, and the second node is in the running in backup mode state. Which action must the engineer take to place both nodes back in the normal state?

A.
Restart the first node of the IM and Presence server.
B.
Click Failover in the Server Action field.
C.
Click Fallback in the Server Action field.
D.
Reinstall the first node of the IM and Presence server.
Question 4:
What is a step when integrating Cisco UACA with Cisco UCM?

A.
create a CTI route point template that will be used by Cisco UACA
B.
create a new end user account to be used by Cisco UACA
C.
create a CTI port template that will be used by Cisco UACA
D.
create a SIP trunk between Cisco UACA and Cisco UCM
Question 5:
Which component of SAML SSO defines the transport mechanism that is used to deliver the SAML messages between entities?

A.
assertions
B.
profiles
C.
bindings
D.
metadata
Question 6:
An engineer is configuring a remote Cisco IM and Presence Service and needs to ensure that users can communicate across clusters in the same domain and receive presence status. Which protocol should be used to accomplish this task?

A.
LDAP
B.
AXL/SOAP
C.
DNS
D.
XMPP
Question 7:
An engineer must configure Open SIP Federation on Cisco IM and Presence using Cisco Expressways with the additional requirement not to allow a specific list of domains and allow all other domains that are not specified. How is this additional requirement met?

A.
Block the specified SIP domains on the Expressway.
B.
Add each allowed domain as a SIP Federated Domain.
C.
Add a static route for each blocked domain and keep the “Block Route” checkbox checked.
D.
Configure default static routes for each blocked domain with an invalid next-hop IP address.
Question 8:
An engineer deploys Centralized Deployment for Cisco IM and Presence, where central IM and Presence runs version 12.0, and remote Cisco UCM clusters run version 10.5. The engineer checks under System > Centralized Deployment and notes that Status remains unsynchronized.
What are two reasons for this status? (Choose two.)

A.
This connection must be synchronized from the remote Cisco UCM Administration menu.
B.
The remote Cisco UCM cluster does not support OAuth Refresh Token flow.
C.
The Cisco UCM and IM and Presence cluster must be running at least version 11.5 to allow for Centralized Deployment.
D.
The username and/or password of the application user that was provided for adding remote clusters to the central IM and Presence is incorrect.
E.
The application user that is configured on remote Cisco UCM clusters does not have “Standard AXL API Access” added.
Question 9:
An administrator must connect multiple Unity Connection clusters using Digital Networking. Which service is required for the administrator to achieve Digital Networking between the clusters?

A.
Connection Digital Networking Agent
B.
Connection Digital Networking Replication Service
C.
Connection Digital Networking Replication Agent
D.
Connection Digital Networking Service
Question 10:
What are two characteristics of HTTPS networking for Cisco Unity Connection? (Choose two.)

A.
HTTPS single-site networks are joined via an intersite link.
B.
HTTPS networking uses a ring topology.
C.
HTTPS networking supports multisite networks.
D.
HTTPS networking uses the SMTP protocol.
E.
HTTPS networking supports a maximum of 25 locations.
Question 11:
What submits credentials to the LDAP server during a call that uses SAML SSO?

A.
Cisco UCM server
B.
service provider
C.
browser-based client
D.
IdP
Question 12:
DRAG DROP
-

An engineer is configuring a Jabber client installation switch for a phone system using Cisco UCM as the registration server, with a softphone control address of 10.0.1.200, and configuration files received from 10.11.20.201 after all previous configurations are cleared. Drag and drop the snippets from the bottom of the image onto the blanks in the image to complete this configuration. Not all options are used.

Question 13:
In the integration of Cisco Unity Connection using SIP, which SIP trunk security profile option is required for MWI to work correctly?

A.
Accept out-of-dialog refer
B.
Accept replaces header
C.
Accept unsolicited notification
D.
Accept presence subscription
Disclaimer:
The content on this webpage is collected from various internet sources. While we strive for accuracy, we cannot guarantee its completeness or correctness. Please use it with caution and conduct further research if needed. We do not claim ownership or copyright over any content. If you find any copyrighted material or content that violates laws, please contact us for removal. By accessing this webpage, you agree to these terms. Thank you for your understanding.