Cisco 644-906 EXAM QUESTIONS & ANSWERS

Exam Code: 644-906
Exam Name: Implementing and Maintaining Cisco Technologies using IOS XR
Questions: 77 Q&As
Updated: 2018-12-16
Price: $ 69 / $ 79

  • Latest Cisco 644-906 exam dumps PDF.

  • Instant download after purchase!

  • Questions & Answers are based on real exam questions and formatted questions.

  • Best price of the whole network.

  • PDF format can be viewed on any device supports printing.

644-906 DEMO (Free)

Description

The latest actual 644-906 questions and answers from ISLEVER. Everything you need to prepare and get best score at 644-906 exam easily and quickly. "Implementing and Maintaining Cisco Technologies using IOS XR" exam engine covers all the knowledge points of the real Cisco exam.

Quality test content is extremely important to us so that you will be prepared on exam day. We ensure that all objectives of the exam are covered in depth so you'll be ready for any question on the exam. Our practice tests are written by industry experts in the subject matter. They work closely with certification providers to understand the exam objectives, participate in beta testing and take the exam themselves before creating new practice tests.


What do you offer?

We provide 644-906 examination of learning materials, it can help you quickly master the test points.

The product contains 644-906 examination common exam questions and answers, covering the real exam content more than 90%.

Product contains labs content?

Yes, Product contains 644-906 exam Q&As and preparation labs questions.

Do you provide free updates?

We provide the updated version of the 644-906 exam free, you can download on the website of the member center.

After the purchase, how long can you get?

7/24, after a successful purchase, you will be able to immediately download the product.

Login to the site, in the member center click download product.

What is the product format, I can use in what equipment?

Products using the PDF format, you can browse and learning in PC, IOS, Android and so on any device that supports PDF.

After the purchase, you do not have any restrictions, even, you can print out for learning.

644-906 IMTXR
Cisco IOS XR Specialist Certification
75 minutes (55-65 questions)
English
Pearson VUE

Exam Description

The 644-906 Implementing and Maintaining Cisco Technologies Using IOS XR (IMTXR) exam is associated with the Cisco IOS XR Specialist certification.This exam tests a candidate's knowledge of implementing, verification testing, and maintaining Cisco core and edge technologies, using the Cisco IOS XR-based router platforms, which include the CRS, ASR 9000, and the XR12000 routers. Candidates can prepare for this exam by taking the IMTXR Implementing and Maintaining Cisco Technologies using IOS XR course.

Exam Topics

The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on the specific delivery of the exam in order to better reflect the contents of the exam and for clarity purposes. The guidelines below may change at any time without notice.

1.0 Platform
21%
1.1 Power
Recommend PDU as a function of facility
Install appropriate PDU for chassis
Monitor system power level
Show power alarm values
1.2 Environmental
Recommend environmental levels for system installation
Verify system-detected environment is within tolerance levels
Show environmental alarm values
Clear environmental alarm
Gather system envinronmental output
Recommend rack space requirements
Use proper grounding for installation
Describe CRS air-flow
Describe Cisco ASR 9000 air flow
1.3 Physical Architecture
Identify CRS switch fabric
Identfy components of CRS fabric
Identify MSC
Identify PLIM
Identify RP CRS/ASR9000
Identify management interface
Identify cable management
Differentiate between single and multi-chassis
Identify ASR9000 line cards
Identify ASR9000 RSP
Identify ASR9000 PDU
Identify ASR9000 SIP-700/SPA
Identify CRS SIP/SPA
Identify CRS chassis
Identify ASR9000 chassis
Describe ASR9000 fabric
1.4 Inventory
Show card status via show platform
Show cards via show diags
Show inventory of the system
Differentiate between admin versus executive plane for show platform
1.5 Environmental (Merge?)
Show power usage
Show fan status
Diff between admin vs exec plane for show platform
1.6 Firmware
Undertanding what is a FPD.PIE
Configure Auto FPD
Understand what is Parallel FPD
Upgrade FPD and ROMMONUpgrade
Understand FPD versus ROMMON
Upgrading FPDs and ROMMONs
Showing current FPD version information

2.0 Operating System
19%
2.1 Install
Add a PIEs or SMUs
Using TFTP, FTP, USB thumbdrive, and hard drive as the source
With Activate flag
Using Source flag
Using TAR file
2.2 Licensing
Activate PIEs or SMUs
Initial or recovery software installation
ROMMON Variables
Turboboot Mini.VM file
Deactivate PIEs or SMUs
Remove inactive packages, PIEs, or SMUs
Committing the Installation Path
Check which packages are active
Check which packages are committed
Check installation log
See what install requests are currently active
Understanding security certificate in PIEs and SMUs
2.3 Packages
Understanding types of packages
Mini.PIE
Mini.VM
Optional PIEs
SMUs
Unstanding IOS-XR versioning and installation restrictions
Understand P versus PX images and the hardware they support
2.4 Two-Stage Commit
Understand what is Active Config
Understand what is Target Config
Understand when is a Syntax Check done
Understand when is a Semantic Check done
Going back to a previous configuration
Showing configuration IDs and labels
Show configuration history
Loading configuration
Committing the configuration
Atomic versus best effort
With labels and comments
Replacing the configuration
Using the commit confirm feature
Show Config Fail
Configure interfaces before the physical interface is available
2.5 Configuration Planes
Understand what configuration is in the Admin plane
Understand what configuration is in the Exec plane
Understand differences between owner and non-owner SDR in access to Admin plane and Exec plane
Understand the default VRF
2.6 Task-Based Authorization
Assigning user privilege to root-system
Assigning user privilege to root-lr
Assigning user privilege to cisco-support
Understand between admin user versus exec username
Understanding how task based authorization work
2.7 Process
How to perform process restart
How to check processes like state, no. of restarts, job id, pid, tid
Show where certain processes are running
How to find a blocked process
Check how much CPU a process is using
2.8 LPTS
Understand what LPTS is
Understand about LPTS Policer
How to use Show LPTS Commands
Show policer values and drop counts in LPTS
2.9 Memory
How to look at the memory utilization on the route processor
How to look at the memory utilization on the line card
Understand protected memory space versus shared memory and which area uses it
Check how much memory a process is using
2.10 Support
How to use Show Tech Support commands
Core file configuration locatioin including hard drive and FTP
Debug commands and with ACL filtering
Locate core files and moving them to a server
2.11 Parser (interacting with)
Using the parser with pipe, include, exclude, begin, regex
2.12 EEM
Base assumption of EEM knowledge - understand what is possible and not possible

3.0 Control Plane
21%
3.1 Configuring OSPF
Configure interfaces to be part of the backbone area
Configure additional interfaces to be part of non-backbone area
Configure non-default metric on some interfaces
Configure neighbor logging so adjacency changes can be monitored
3.2 Verify OSPF
Determine status of OSPF interfaces
Determine status of neighbors
Display OSPF database and determine which links are present
3.3 Configure ISIS
Configure the ISIS NET
Enable ISIS for ipv4 unicast routing
Configure interfaces for ISIS routing
Enable ISIS for ipv6 unicast routing
Enable some but not all of the ipv4 enabled interfaces for ipv6 routing
3.4 Verify ISIS
Determine status if interfaces configured for ISIS
Determine the status of the routing adjacencies
Display the ipv4 unicast route table
Turn and debugging for ISIS adjacencies and explain the information shown
Display the topologies for IPv4 and IPv6. Why are they different?
3.5 Add Static Routes
Configure static routes for IPv4 unicast in the global table
Configure static routes in for IPv4 unicast in two different VRFs
3.6 Configure BGP
Configure an autonomous system number for BGP to use
Configure BGP to support IPv4 routing
Configure BGP to support IPv6 routing
Configure iBGP neighbors with the typical configuration to use loopback addresses for peering:
Use neighbor-groups for identical configuration sections on multiple peers
Configure one iBGP neighbor to exchange both IPv4 and IPv6 prefixes over an IPv4 session
Configure one iBGP neighbor as an IPv6-only neighbor with IPv6 peer addresses
Configure eBGP neighbors for IPv4 routing
Configure a simple pass_all policy for those eBGP neighbors
Add VPNv4 capability to one iBGP peer
Add two VRFs into BGP and redistribute static routes into BGP for VPNv4
Configure one iBGP peer to support 6PE type functionality by adding address-familiy IPv6 labeled-unicast
3.7 Verify BGP
Display the peer summary status for IPv4 and IPv6
Display the IPv4 BGP table
Display a specific entry and explain AS path and next-hop information
Determine how much memory the BGP process uses
3.8 Understanding RPL Concepts
Configure RPL
Define an AS-set for use in RPL
Create a route policy that checks for an AS from the AS-set and adds a community for matching routes
Create a route-policy that uses an inline prefix-set and changes the local preference when a match is found
Create a route policy that adds a community where the community is used as a parameter when the policy is called
3.9 Verify RPL
Verify that communities are added as expected
Execute a show bgp… command using a route-policy to modify the output. Compare to regular show command.
3.10 MPLS LDP
Configure router to run LDP
Configure router to log neighbor events
Enable LDP on interfaces
Execute show command to verify status of LDP neighbors
3.11 MPLS TE
Configure OSPF to support traffic engineering extensions
Enable RSVP on interfaces
Create an MPLS TE tunnel with two different path options:
First path explicit
Second path dynamic
3.12 Execute Show Command to Determine Tunnel Status at Tunnel Head
Execute show command to determine tunnel midpoints traversing the router
3.13 Configure IP Multicast
Configure PIM-SM, PIM-SSM, PIM-SSM range
Configure static-RP, Auto-RP, and BSR for PIM-SM
Confiigure Multicast NSF
Configure Multicast VPN
Configure MSDP for interconnecting PIM-SM domains
Configure MoFRR
Configure P2MP-TE for IP Multicast

4.0 Data Plane
20%
4.1 General Forwarding
Understand and monitor interface counters
Clear interface counters
Modify interface counter load interval
Understand the flow of packets through a router
Describe the difference in processing of transit packets versus locally destined packets
Understand the information stored in a forwarding table entry
Troubleshoot packet drops
4.2 Access Control Lists (ACLs)
Implement ACLs to filter traffic on an interface
Monitor ACL counters
Modify an existing applied ACL
Apply ACLs in debug commands
Resequence an ACL
4.3 Quality of Service (QoS)
Implement a basic Quality of Service configuration
Monitor Quality of Service statistics and behaviors
Modify an existing QoS configuration
What is the difference with QoS on IOS XR
4.4 NetFlow
Describe NetFlow capabilities in IOS XR
Implement NetFlow packet sampling
Verify record export
Monitor the NetFlow cache
4.5 Unicast Reverse Path Forwarding (uRPF)
Implement uRPF on an interface
Verify uRPF behavior
4.6 Interface IP addresses
Configure IPv4 addresses on an interface
Configure IPv6 addresses on an interface
Resolve duplicate IP subnets configured on the router
4.7 IP Multicast
Describe Multicast forwarding on XR platforms (egress and fabric replication, etc.)
Monitor IP Multicast traffic
Troubleshoot IP Multicast (RPF, mrib, mfib, olist, etc.)

5.0 Management Plane
19%
5.1 Implementing SNMP on Cisco IOS-XR
Configuring SNMP (v1, v2c, v3) - Does everyone use SNMPv3?
Configuring SNMP trap notifications
Configuring SNMP views, SDRowner and Lrowner
Configuring SNMP ifIndex persistence
Verify SNMP configuration - e.g. using snmpget or snmpwalk
5.2 Implementing Logging Services on Cisco IOS-XR
Configuring logging buffer
Configuring syslog server host as logging destination
Configuring terminals for logging display (term mon)
Configuring logging facility
Configuring local logging device and archiving
Monitoring logging buffer and filtering messages
5.3 Implementing Physical and Virtual Terminals
Configuring line templates, vty pools
Configuring exec timeout
Securing vty line and vty access
Verify vty access-group configuration
5.4 Implementing SSH Access on Cisco IOS-XR
Configuring SSH server (including crypto key generation)
SSH client usage
Verify SSH configuration
5.5 Implementing Telnet Access on Cisco IOS-XR
Configuring telnet server on IOS-XR
5.6 Implementing XML Management on Cisco IOS-XR
Describe XML management on IOS-XR
Configuring XML agent on IOS-XR
Configuring VRF access for XML agent on IOS-XR
5.7 Implementing TACACS+ Authentication, Authorization and Accounting
Configuring AAA Authentication - Using TACACS+ and local as fallback
Confguring AAA Command Authorization - Using TACACS+ and local as fallback
Configuring AAA Command Accounting
Implementing TACACS+ - Assigning task groups and privileges
Verify AAA permissions upon command failure (i.e. debug aaa)
5.8 Configuring CDP on Cisco IOS-XR
Enable CDP on IOS-XR
Monitor CDP neighbors and parameters
5.9 Implementing Management Plane Protection (MPP) on Cisco IOS-XR
Configuring MPP to restrict access from specific IP Addresses and protocols
Configuring MPP to restrict access for out-of-band interface
5.10 Implementing NTP on Cisco IOS-XR
Configuring NTP server
Configuring NTP peer
Securing NTP configurations (NTP access groups)
Verifying NTP status
5.11 Implementing SDRs on IOS-XR
Understand SDR
Describe DSC
Assigning SDR access priviledges
Creating SDRs, adding nodes to non-owner SDRs
Creating username and passwords for non-owner SDRs
Rebooting non-owner SDRs
5.12 Chassis and Hardware Management
Displaying installed modules, status of modules
Displaying environmental status (fan, power, etc)
Enabling and disabling power to a specific line card or module
Reloading line card or module
Displaying chassis and module serial numbers
Reloading RP
Reloading entire chassis
Troubleshoot reason why PLIM/MSC is not booting up
5.13 Implementing EEM on Cisco IOS-XR

BHASKAR_RAO
After getting prepared with the products of Islever, I felt confident and knowledgeable before real 644-906 exam. Islever facilitated me to show good performance in 644-906 exam, so I passed the exam.

tahirkamal
It is difficult to believe I did it that great but I won't be able to be so successful if I hadn't use the 644-906 study material which I purchased following my friend's advice.

Langeman
Thank you helping me pass the 644-906 exam. While studying, I didn't have to waste time on topics that aren't relevant to the exam because focuses on topics that are on the Implementing and Maintaining Cisco Technologies using IOS XR.

Anastacia
Study guides offered by ISLEVER are reliable and the best source of help that provided me enough information to pass the Implementing and Maintaining Cisco Technologies using IOS XR.

omar2013
You can also take the reward this splendid opportunity and it is 100% guaranteed that you will be at the top of success in your exam.

nano
The dump is still valid in South Africa i passed today with 9xx.